@tbt3399 Hi. The game can be on any of the PC drives. This is not the cause of the error.
Your report says this error:

Exit code: 0xC0000005 - STATUS_ACCESS_VIOLATION

See this guide and follow the steps to fix this error https://community.bistudio.com/wiki/Arma_3_Unusual_process_exit#0xC0000005_-_ACCESS_VIOLATION .

@Geez Hi. +100% It is reproduced in any action when the stamina of the character has not recovered. If stamina is still not restored, trying to climb over the fence or run will be played with a delay character. It looks terrible for playing DayZ. It plays like a log on the server - poor implementation in an attempt to overcome the fatigue.
https://youtu.be/ylUpEnYIACU

@pTwist1 To send error report file, or picture, I open a ticket in the browser Microsoft Edge. In the field for the message drag and drop files - it downloads the files to your feedback tracker.

@MichaelKarn wrote:
I'm unable to test it without a wireless headset, I don't have speakers, I only use headset audio.

Your PC must be built-in sound card - a device for connecting a wired headset or speakers with a 3.5mm plug.

@Geez Hi. This looks like a bug but the player's actions are not registered on the server, in some cases. A player loses the possibility of action on the objects which lost registration interaction. Relog player on the server - again detects the position of the object in the player's inventory, this brings the opportunity to perform actions with objects. The problem occurs in 99% of cases - using keys "swift action" to \ on objects:

• to take the subject at hand
• to throw an object from hand
• charge the rifle in a new store

and so on.

In T144527#1957648, @MichaelKarn wrote:

I have tested it.
They use zero mods in relation to voice.

I'm not a team game developers. I just want to help bridge the gaps in the information about your problem. Lack of information and lack of such problems on the tracker interfere identify the problem. Have you tried to use another audio device as a sound will be played on the speakers of your PC, without the use of Wireless Headset? The problem persists?

In T144527#1957641, @MichaelKarn wrote:

You might think that it has something to do with the microphone of the other individuals, except it occurs with everyone, and only on DayZ. Discord audio for those same people is fine.

You play on a server that is using mods. You need to find out from the server community - what mods they use for voice communications and some events you do not have.

In T144527#1957634, @MichaelKarn wrote:

and it only has problems with other individual's voices. Game audio is perfectly fine.

@MichaelKarn You forgot to write - which of the two audio devices you want to use in the game, and the product model. Have you tried to make changes in the sound settings in Windows 10? There you can choose the application and set the default audio device that will be used in the game.
Follow to the "Speakers" right-click> "View audio settings"> "Advanced Options Sound", select DayZ, assign devices to audio and microphone.

@Allantheking Hi. In the process of using links to ticket only ticket number - T****, it will look like T143862 , and automatically create a duplicate link to the root of the ticket.

@Mash6 Hi. Use the search on the tracker that would look for similar problems. Look at the ticket T143862.

@Geez @Allantheking The same video rifle VSS. This happened after I pressed the button fast recharge - keep the "R" key. Full shop attached to the VSS. I am trying to fill the half-empty ammunition store from VSS. No matter how I try to do this, hold down the "R" or the inventory menu - the animation starts playing and suddenly end. Also, I can not be attached to the rifle VSS another store, or return back to the half-empty shop rifle. I disconnected from the server. After a new connection to the server in the inventory can be seen that my half-empty shop still in VSS rifle. Game \ server did not register connection to the rifle of a new store, but disconnected from the server inventory shows that a full magazine was attached to the rifle. For this reason, the game does not let me make any action rifle VSS and a half-empty magazine from the VSS.
It does not happen always. I can not say with confidence that this de-synchronization with the server. This happens on any rifle or pistol, but after applying a fast recharge - hold the key "R". Or perhaps this action is not always synchronized with the server?
https://youtu.be/U6CZFQBINYM

@EnterThePug Moon should play a significant role in the night sky. Look in the game on the moon trace of light on the water surface.

@EnterThePug +100% With a large load of equipment character, the player loses the opportunity to overcome obstacles, but there are some low obstacles which can be reached with a large load.

@sanguine00 @EnterThePug Brightness of the night depends on the server configuration, which plays a period - month of the year, week, calendar day. Seasons have different intensity of illumination of the horizon and the night sky. The lunar calendar is working, but in the game the moon is not a source of light. For these reasons, we can hear different opinions about the brightness of the night from the players. Each expresses an opinion about their experience of the game, each with its own experience on the time period of the year on the server. Someone usually gets on the server with a bright night sky, someone with a dark night sky.
Details in my ticket on the problem of work lunar light T143219.

@EnterThePug Maybe it will help you. I have done both on this video. This allowed me to choose the video settings in the game are higher than advised this video. Now my FPS vary from 60-70 to 130-140. Turn translate subtitles in the desired language for you. https://youtu.be/rfQimjVOXuk

@asog88, You are doing the right thing when you create tickets pas problem. But you it is important to understand that a lot of tickets on the exact same problem are not needed. Use the search box on the tracker. Search by keywords or phrases to find a list of tickets with a similar name. For example a search for "knife sounds" is the ticket - T143745. If you find a ticket for the desired issue, go to it and add your message, if you have additional information.

@asog88, In a year there are only three months when the night can be short and very light.
Changing only periods of the year, at the same time of day can be very dark or very light.
https://youtu.be/RG6fKCnAlo4
What time of year was on the server?

@Allantheking Unfortunately, I don't have a video about gun interaction. At some point in time, the server stops registering the player's actions because it doesn't know where any object of interaction is. It feels as if the server at some point has lost its position of the object - does not allow the player to interact with it, as he believes that the object is still in the backpack (in his hands, on the ground), or elsewhere. It happens the same way as in this video with a jacket. When I threw the jacket on the ground, the server didn't register it, and I lost the ability to interact with the jacket and its contents. When I reconnect to the server, the server redefines the position of items in the player's inventory or in the player's environment. https://youtu.be/fl-C-vv_wqU

@Geez @Allantheking I'm not sure at 100%, but in my opinion similar problems in the inventory or any objects have a common origin, which is described in this ticket T144739 .
This can happen with any weapon - recharging stops working.
The problem plays like - some of the animation begins to play and suddenly ends, or animation can not be played. This recently happened to me. I have attached a full magazine into the rifle with fast recharge keys. After that, I could not fill the empty magazine cartridges, I could not attach to the rifle another store. I left the game on the server, and then reconnect to the server. I open the inventory and see - empty magazine is attached to the rifle, and a full store is in a backpack. It seems that some of the actions of the player are no longer logged in the game, leading to the freezing of operations on objects, as objects in a confused state. The game does not understand what you have in hand, and what actions can play.

Duplicate. This ticket has already described this problem T143682

@Geez Perhaps this is related and has a common root. In this ticket T144739 ,I described a problem with the character, which often occurs through rotation / exchange of objects in hands, or another reason. This problem always starts playing suddenly. The problem can block any animation on the character, take an object, charge a cartridge, eat and drink, dressing wounds and so on. Getting out of the north and logging into the server again often helps, but I had a case when this did not help, and I was forced to start with a new character.
https://youtu.be/3J7zgtrq1B4

You can reproduce this problem without Mods, in a vanilla game?

You can reproduce this problem without Mods, in a vanilla game?

@AXEL7 I am not from the development team. I wanted to help you fill in the gaps that are in the ticket description. If you read the ticket, the name suggests that a client with poor internet cannot reconnect to the server. No developer can care about the quality of the client’s Internet. The name of the ticket is confusing. For this reason, the name should sound like - "The server cannot correctly kick the player from the server in some cases" or similar. This may help to quickly understand the essence of the problem. I guess that @Geez was also confused, he was distracted by the name of the ticket. This follows from his answer and question to you, since it is almost not important why the client lost contact and what is written in the picture. The essence of the problem is deep in the ticket, not on the surface. Now you should not change the name of the ticket, just give an answer for @Geez - about the essence of the problem.

@AXEL7 Player ping should not cause a big problem. You can have a small ping, but if the communication channel is unstable and has many waiting time intervals, this is primarily a client problem, and secondly it can become a problem for other players on the server. I do not know how the ping limit is implemented for players on DayZ servers. In Arma, from RCon, you could select any ping value for the limit, and the server automatically kicked the player with a ping above the limit. Does Dart have such a setting for the server?

Thanks for this instruction. But I ran into an even bigger problem in this part. I can’t say for sure what inventory items the problem for my character started to play, but sometimes this problem can cause even a double-click to fail. To restore normal operation, it was enough for me to go to the main menu of the game and return to the server. Several times the problem suddenly disappeared, but this is a harbinger of the fact that this will happen often. Therefore, I do not wait for the next case and immediately exit the server and return to the server.
There was another case on the mod server, immediately after the release of 1.05. The server did not check the mods, for this reason they did not kick me from the server. I started the game on the server with a new character and without mods. When they told me about the mods, I downloaded and installed them, went into the game and continued my script with the same character. Later, when this inventory problem first occurred, the problem began to progress. Gradually, I could not reload cartridges on pistols and rifles, later I could not drink and eat ... any animation started playing and immediately stopped playing. I could exit the server, and when I returned to the server I found objects in the inventory that I threw out before leaving the server. When I repeated this several times, I realized that this is not a server problem but a problem with the character. I had to put all my inventory in a barrel and kill the character. He started the game with a new character and regained all the equipment from the barrel. After this procedure, I did not get such a deep problem, only periodically there was a problem with the exchange in the inventory and I did not try again, expecting the problem to deepen on the character.

+100% Sometimes I don’t even have time to notice how the problem begins to play on the character. Sometimes it seems that this can have any sequence of actions in the inventory. In the last week, I played on a server with a low load, only 3-8 players on the server, and this happened even when I was alone on the server.
The problem never occurs at the beginning of the game, but after one hour (or more) it is expected.

@AXEL7 Somewhere on the tracker there was a ticket about a similar problem that the client, going to the main menu of the game (due to disconnect), could not connect to any server without restarting the game. Only after restarting the game did he manage to return to the server or connect to another server.
 But all this is more like a special case, since there are no mass complaints with a similar problem. I see only the second such ticket.

A possible problem may be the client's IP address.
Check the path on the CMD command line (Win + R - cmd), from the client to the problematic IP address of the game server, command:

1. tracert IP address - shows the path to the server, and on which server path the problem occurs
2. ping IP address -t - will show if there are time intervals in packets

@Kuznetsoff Can you record and show a video about how this happens? I can’t reproduce this according to your steps, but I periodically encounter this problem and cannot build dependencies for this problem.

@Geez Bad rendering can happen for any object in some areas and at any distance.
A few Examples in this video https://youtu.be/rCin2bLgOpQ
I can be mistaken, but if the subject is in open space, where there are no other buildings or other objects nearby, problems do not arise with rendering.

Report it in this ticket T139622 . The problem is reproduced in different places.

@Geez The problem is general in nature and is described in this ticket T139622 . In my experience, this can occur when exchanging inventory with any items. Or is the problem of a different nature?

@Geez Do the same to hold your breath T142835

@Geez Hi. At the moment, after update 1.5, a single shot from any pistol with a suppressor causes attention and a zombie attack at a great distance. Not sure, but now the detection radius for zombies is up to 80-100 meters, or more. Previously, a single shot from a pistol with a suppressor could activate zombies at a short distance, up to 25-35 meters. I can’t say what caused the activation of zombies, or the sound for them also sounds like a shot without a suppressor (the problem is described in this ticket T143724), or the detection distance from such a sound is increased.

@Geez Hey. Look at this ticket please.

@Geez Hey. Is there any progress news for this ticket? Thank you in advance for your response.

Excerpt from dynamic 360 degree multi-level range warm up
https://youtu.be/Qd1DFJDleQI
There are certain ways not to develop inertia with a rapid change in the aiming vector. This should be taken into account with which weapon and at what amplitude the barrel vector is reoriented and from which position of the shooter it is made.
If players do not have reliable ways to reduce inertia, and with any small movement to get a lot of inertia from any position of the character’s doll, this will be perceived very negatively.
I would not want to see measurements for inertia in the form of "swimming in water" for an untrained fighter.

1. Do you think the character’s life time should affect the increase in the character’s experience?
2. How should the general condition of a character affect a young and experienced character?

Do not think that I am against changes in this area. I want that we could get a lot of dependent system. I am opposed to just a slowed down system for any conditions.

In T142876#1946358, @EnterThePug wrote:

@jamielou.007 I agree with most of this, but reducing the player speed is a big no-no, for me. The majority of our time is spent traversing the 225 square km of Chernarus. Doing that at a slower pace would be painful. If anything, I want to see jogging/running speed increased! I think proper acceleration, and deceleration will be enough.

@Kuznetsoff There is a similar problem with the animation of changing inventory in the hands. A jump on the spot helped me, after this action I could pick up objects again. Try this method to get rid of the problem.

I would also like an additional option to your proposal - double click on the "R", so as not to hold the key.

@Geez In Arma3 for a long time (4-5 years) there was a problem with flying tanks. Can you recall how this was fixed in Arma3?

In T137397#1937556, @Dimas008 wrote:

In T137397#1937346, @Lex wrote:

In T137397#1937284, @Dimas008 wrote:

In T137397#1936588, @Lex wrote:

The reasons why supressors can be damaged in a backpack are clear.

Can you please describe to me what reasons are affecting that? Because I still think that this bug with random suppressors item condition changing should be fixed.

@Dimas008 Several times I got the destroyed suppressor in my backpack. This does not always happen, it is just strange that out of all the objects inside the backpack, the backpack itself and the suppressor receive damage. Other items in the backpack were not damaged.

And where are the reasons? It is still a bug, so there are no reasons and they can't be "clear" because we can't see them.

In T143590#1942122, @rlagudwns26 wrote:

as you know, glock 19 also can do.
is this will be fix later? or is this normal in game system?
glock have a really big problem when jump until reload glock mag or chamber... than character is bugged.

The problem is urgent. But before this problem can be eliminated, it is necessary to change the concept of wear of a weapon or its parts. The player gets severe wear after using 2-3 cartridges. If there are reasons affecting the rapid wear of parts of a rifle or pistol, there should be indicators warning of this effect - barrel overheating or the like. At this point in time, natural wear does not look natural - very fast wear on silencers and pistols.
A weapon cleaning kit is for the most part wear prevention rather than repair. The cleaning kit may run out of oil and paper, the player must be able to fill out the cleaning kit.

I also saved a video for this problem, I was going to open a ticket on this topic. Need Anti-glare effect on the glass for the sight "Baraka".

@Geez Hi. A grindstone is also not suitable for repair? or what should be used to repair it?

In T137397#1937284, @Dimas008 wrote:

In T137397#1936588, @Lex wrote:

The reasons why supressors can be damaged in a backpack are clear.

Can you please describe to me what reasons are affecting that? Because I still think that this bug with random suppressors item condition changing should be fixed.

@EnterThePug Basic destination supressors:

@Geez Hi. For the most part, the issue on this ticket has been resolved. There is access to check the status of any component of the weapon. The reasons why supressors can be damaged in a backpack are clear.
The main question in the name of the ticket did not receive any changes. A small number of shots that supressors can withstand - before the status of "worn out" or "damaged".
I cannot provide accurate indicators of the firing resource between different supressors models, but all supressors have a very small resource. Especially small resource for pistol supressor.
Will there be changes to increase the supressors resource?

@EnterThePug Hey. Some jackets or trousers can easily fall below floor level. Often this happens in barracks, hangars and other buildings. Watch this video.
https://youtu.be/ZLXciULHE3w
@Jad See this ticket T139622. This sometimes happens with any items. There is a restriction in the name of your ticket - you have identified a problem for one subject, and the essence of the problem is missing. This limited the search for the problem by the name of the problem and made it possible to create a duplicate of the problem on the tracker. The problem is not about changing clothes. Any clothing can fall below floor level when dropped on the floor from its hands or from its inventory.

@Geez Hi. Can you check it out?

@Geez hi Are there any changes in plans for the future?

@Geez hi

@Geez hi. Please check this issue

In T82570#1673461, @madpat3 wrote:

it seems, that at least for the darter , it doesn't delete last waypoint. set a waypoint for the darter via terminal. see how it begins to travel to it. then delete the waypoint. see, that it's still flying towards the already deleted waypoint.

@Lex: better?

This seems to be a common problem for AI, which I pointed out on this ticket https://feedback.bistudio.com/T127626 .

In T82570#1813470, @Chubbs wrote:

In T82570#1664972, @Lex wrote:

Open as Feature change
T120265
Merge tasks
T120263

This is also not related to the problem stated in this ticket.

Communication is not in the problem, but in the UAV, which comprehensively receives the problem of control / use in all functions that the player does not receive when using the UAV. By the sum of the problems, the player cannot comfortably use the UAV in the game for many problems. I point to this connection.

+100% In addition, there is a related problem. If for the UGV stomper to assign "follow" the player loses the ability to:

• cancel this task stomper UGV
• cannot assign any waypoints to stomper UGV
• task assignment menu for stomper UGV is unavailable due to the feature "task menu without waypoint is not available for UGV" https://feedback.bistudio.com/T120263

Another UGV issue on this ticket
https://feedback.bistudio.com/T120280

In T141685#1907955, @Xey wrote:

In T141685#1907542, @Lex wrote:

You have created a ticket in the section Arma3. Transfer it to DayZ.

Yeah, I've noticed that too late. I seem to not have the permission to change the tags on it >_>.
Unless I'm missing an option... Care to help?

This will ever be corrected or any answers here, after 1.5 years and 12 patches from 1.78. up to 1.92?

This will ever be corrected or any answers here, after 1.5 years and 12 patches from 1.78. up to 1.92?

@Geez It may be necessary to close all tickets associated with this ticket.
Look at them.

T140789: weight of various items, the issues are still being worked on

T140510: Plate carrier 12 kg/ plate carrier+pouches = 25kg?
T140190: plate carrier takes up more stamina than it should
T140104: ! GAMEPLAY BREAKING Weight Bug !
T140178: Abnormal decrease in stamina bar on an experimental server.
T140011: When you have a very small amount of endurance you can not run.

BIS !!!!! When will the attention be on this ticket?

BIS !!!!! When will the attention be on this ticket?

You have created a ticket in the section Arma3. Transfer it to DayZ.

@R3vo Is it in development? I do not have in the context menu "Edit" part of the menu block. I can only find these menus in Tools> Placement Tools.

@thatasianguy Hi. There is a ticket T139932 where you need to collect all the problems of incorrect weight counting when merging equipment items.

@oukej This is fixed, checked in DEV 1.95.145729. Close this ticket

In T126133#1632049, @Geez wrote:

Hello Libido and thank you for the report.
The issue with the barrack windows is known and scheduled for a fix. If it is not an issue, can you send us a screenshot of the "Brown one story cabin" so we can check it as well?
Regards,
Geez

The script is ill-conceived, it is too simple to look ridiculous and needs to be improved.

1. This applies to the iron stairs and the descent on them without gloves at a fast pace.

I think that a fire indicator is needed that will tell us - “the guy is already very hot, it's time to cool down”

2. This concerns the iron stairs and the lack of information about its condition.

We do not understand that the stairs have lost paint, rusty and can cause us damage. The message "On the state of the ladder" should be in the scenario or exclude the possibility of receiving damage from iron stairs. This should also be implemented for wooden stairs.
I must somehow understand the state of the staircase and how to behave on it, maybe I don’t even want to ruin my gloves.

3. The character’s weight does not affect the degree of wear on the gloves. It does not depend on the weight of the character, how tightly I have to hold on to the ladder, this should influence how quickly or slowly the gloves get damaged. At this point in time, the service life and wear degree of gloves remain the same for any weight.

@Asphronix You need to clarify the conditions to reproduce it.
If the target is close to the wall (~ 0-40cm), it does not receive damage from HEAT penetration.
If the target is farther from the wall (~ 40-70cm), it receives damage from HEAT penetration.