When you crash, the game will most of the time generate crash dumps and logs that can be analyzed to find out why it crashed.
.RPT logs + dump files can be found in %localappdata%\Arma 3\. Take note of the date your game crashes and compare it with the date stamp of the dump files.
By placing them in a compressed archive and dragging and dropping it here, you can upload them.

For sure I will. Sorry for the inconvenient of useless attached files.... I just followed the instructions, but I don't really know how all this stuff works.

Hi,
this issue should be fixed in next update. You can try it now in Arma 3 devbranch on Steam or in RC version on Steam.
https://dev.arma3.com/

In T138818#1857925, @Astaroth wrote:

Hi,
could you please try it in 1.92 RC branch? We have few official servers online so please try if you are able to connect in the new version. Beta code is Arma3Update192RC.
https://dev.arma3.com/rc-branch

In T138818#1857971, @Lex wrote:

In T138818#1856581, @Plastilin wrote:

In T138818#1856580, @Vitdom wrote:

It might not work but try uninstalling BattlEye and reinstall it again on your system.

Run as administrator ...\steamapps\common\Arma 3\BattlEye\Uninstall_BattlEye.bat then
Run as administrator ...\steamapps\common\Arma 3\BattlEye\Install_BattlEye.bat

"Tried everything" means - tried everything.

@Plastilin Maybe I'm wrong. But when BattlEye is removed, BattlEye user folders remain on the system disk. After deleting BattlEye, Use the search on the system disk, find all the folders named BattlEye. Delete these folders. If deleting folders encounters a failure to delete, in the task manager, find the BE processes and close them. Continue deleting the BattlEye folders. Reboot the PC. Install BattlEye.
This problem could occur when Arma3 or DayZ was updated, but some of them launched the old version of BattlEye.

In T138818#1856581, @Plastilin wrote:

In T138818#1856580, @Vitdom wrote:

It might not work but try uninstalling BattlEye and reinstall it again on your system.

Run as administrator ...\steamapps\common\Arma 3\BattlEye\Uninstall_BattlEye.bat then
Run as administrator ...\steamapps\common\Arma 3\BattlEye\Install_BattlEye.bat

"Tried everything" means - tried everything.

Hi,
glad to hear. Thx for info.

Hi,
could you please try it in 1.92 RC branch? We have few official servers online so please try if you are able to connect in the new version. Beta code is Arma3Update192RC.
https://dev.arma3.com/rc-branch

Hi,
could you please try it in 1.92 RC branch? We have few official servers online so please try if you are able to connect in the new version. Beta code is Arma3Update192RC.
https://dev.arma3.com/rc-branch

Hi,
crashdump wasn't created. Just rpt files and they are without some useful info. Could you please attach new dumps if this issue appears again? Thank you.

+1 to this issue.
Have noticed the exact same issue. Can also change the flight model on the fly and you always get the same results. AFM = shaky/skipping frames, Standard = Smooth
Happens in all aircraft as far as I can tell, just more noticeable when on a door gun.

However, since yesterday the old problem is back - whenever there is a car nearby or I start a car/heli/whatever, my game crashes. When im switching to the in-ears, it works again. soundcloud downloader android

I apologize, I meant to add in the fact that I have "Vehicle Freelook" Enabled so I do not steer with my mouse at all.

@Wulf My ticket T120265 was closed - as "no problem" or "this is according to the scenario." But you do not solve the problem of moving the darter to the control point. As a result, we have a non-working darter, we have the opportunity to stop the rotation in offline mode, but we lose control of the camera. What happens four years, and when this ticket will find the attention and solution?

1. I don't know what you guys did? I checked it today in DEV 1.93.145618. Control of the tank - I lost the ability to order for continuous movement, for the driver of the crew.

There are commands in the tinctures, they sound for the crew, but this does not produce actions by the driver of the crew. Continuous back and forth does not work.
There are only two ways left to get the tank moving continuously forward, hold down the "W" key or assign a waypoint that causes other problems described in this ticket https://feedback.bistudio.com/T127626.
Continuous backward movement is only one way - to hold the "S" key.

In T138818#1856580, @Vitdom wrote:

It might not work but try uninstalling BattlEye and reinstall it again on your system.

Run as administrator ...\steamapps\common\Arma 3\BattlEye\Uninstall_BattlEye.bat then
Run as administrator ...\steamapps\common\Arma 3\BattlEye\Install_BattlEye.bat

It might not work but try uninstalling BattlEye and reinstall it again on your system.

Sounds like something is wrong with your mouse.

In T138818#1856410, @Vitdom wrote:

Which version of Windows 10 are you using?
Ctrl+R "eventvwr", OK then write down the version and build numbers.

v. 1809 17763.437

I would love this feature too. To be able to toggle to mute all players with a keybind, in those moments when you need to listen for footsteps and everybody is going off on side chat.

I checked it today in DEV 1.93.145618.
Two optical sights corrected - ERCO and MRCO.
Two riflescopes are hidden in the Gili texture - the RCO and ARCO.

@razazel Thank. I checked it today in DEV 1.93.145618. Now the range of viewing the image in PIP in a direct distance of about 2000m, before the fog appears in the PIP window. But this is still not the full viewing distance from the camera.
As I wrote earlier, the decrease in FPS does not depend on the viewing distance in the PIP window. FPS size does not change for any viewing distance in the PIP window. Even when there is only fog in the PIP window, the size of the FPS will not have a magnitude higher, it will not change. I'll add a video in which even opening a second PIP window does not unbalance FPS.
https://youtu.be/ZigenlNXzrc
If the FPS has a stable value, why not make a preview in the PIP window for the whole distance, the distance available in the game \ mission settings?

I will have a look for it next week.

Still an issue in version 1.90.145471

Which version of Windows 10 are you using?
Ctrl+R "eventvwr", OK then write down the version and build numbers.

Try and validate your game files through Steam>DayZ>Properties>Local Files>Verify Integrity of Game Files.
Then uninstall BattlEye and reinstall it again on your system.

"a flash of black screen" usually mean something is wrong with the graphics driver. You can try and update your graphics driver.
Also, Windows almost always logs an error when this occurs, look up the details in the Windows Event Viewer?
Ctrl+R "eventvwr" OK, check Windows Logs > Application / System

@thanos17997 What did you want to offer, I did not understand why the link to the OS panel?

Ah. One change was made. I went from

And now it's working correctly. Same code, same game session, but the knee baseball now shows up where it should.

Nevermind it was fixed apperently it was my headset causing the crashes

@Wulf Thank you for correcting this ticket. I checked it today in DEV 1.93.145618. Close this ticket.

@Wulf I checked it today in DEV 1.93.145618. No fix for the ticket. The last waypoint is saved and in certain situations appears again for the driver of the car.

In T136490#1816048, @Wulf wrote:

Hello.

Thank you for the report. Is the crash random or does it happen when you do soemthing specific?

I believe this issue was resolved a long time ago and can b closed.

MX Magazines are now interchangeable with the latest Dev Branch update. This issue can be closed.

Solved with EXE rev. 145618
https://forums.bohemia.net/forums/topic/140837-development-branch-changelog/?do=findComment&comment=3351443

@razazel some considerable amount of time has passed since you last gave us an update. The issue is sadly still relevant an will very likely also be present in the upcoming Global Mobilization DLC since it shows in Mondkalbs Global Mobilization - Demo Vehicle from the Steam workshop.

@Dwarden Please assign this to someone else since Alwin is not active anymore. The problem still exists and will also in the upcoming DLC -Global Mobilization since it is present in the Global Mobilization Demo Vehilce from the Workshop.

oyuna giriş yapamıyorum hata raporunu rar olarak attım

Thanks, I had an old Saitek joystick plugged in and it must have effected the game.

Hi,
all crashes are in SaiQFFB5.dll. It's part of Saitek drivers. Do you have any Saitek drivers installed? Could you please update drivers to the latest version or try it without these drivers?

Hi,
could you please try it in vanilla game (game without mods)?
Thank you.

@Bohemia any progress with this??

JIP year should be fixed in the next dev, changing date in the middle of the mission will require remote exec due the command having local effect https://community.bistudio.com/wiki/setDate

Asking around, it seems this bug has been in game for a long while now. It seems to have been around since the inception of loadouts so I'm gonna guess this is a core engine issue that's probably not going to be fixed. :( Hopefully you guys get it right in Arma 4 @Bohemia !

This shouldn't be difficult to fix, I think.

Valid as well for CSAT!

Should be fixed, this or next dev update

16 years, we are getting closer!

During the Mission Exit Strategy i opted for the helicopter ambush after calling in the helicopter and waiting for the Approach the game crashed repeatedly. After reverting it crashed at the start of the Mission Exit Strategy.

Can you describe at which point in the campaign did you crash?

+1 another upvote years later, BI please add this.
One reason is for the mod Addon-Free ArmA Radio, though I know that is pretty particular.

file added