Hello Wulf,
I am not experiencing issues with other games or any other mission in Arma 3 (at the moment).

Me too, as soon as I load the mission file "to_c02m02" the game crashes. Windows reports "bad_module_info" and arma says "access violation".

Disregard, I spammed 't' (manually spotting explosives) for 2 mins then it popped up.

Thats 5 communities that is suffering with this some have been suffering for over 12 months, can we get some sort of acknowledgement that this issue still exists, you contact bohemia to report it and they say post here, when you do nobody ever responds....

Thank you for the report. I can see that you have some mods enabled. Does the crash occur even with mods disabled?

Thank you for the report. Are you experiencing issues with other games as well? The recent update of Windows has caused a lot of games to crash with"bad_module_info has stopped working".

Hello czlowiekalpha and thank you for the report.
Have you started to experience this issue after a patch that we have released or has it started suddenly? Have you tried adjusting your video settings / removing the contents of your C:\Users\*username*\Documents\DayZ folder to see if it has any effect on the issue? Are you using any launch parameters? Were there any software changes on your computer prior to the issue appearing? Does the issue occur on both experimental and stable branches? Also, please upload your dxdiag file to this ticket - the upload button can be found on the bar at the top of the comment window.
Regards,
Geez

Thank you for the report. Please re-install .NET Framework 4 with the latest available version (currently 4.7 https://www.microsoft.com/en-us/download/details.aspx?id=55167)

Hello Spazzmo and thank you for the report.
Is the issue that the zombie is pushing your character while it is in prone or that it cannot hit you while you are under a fence?
Regards,
Geez

Thank you for the report. We will have a look at this.

I'm sorry for the delay. This is the problem that occurs on the BR servers, inexplicably it does not occur on the foreign servers when I play.

In T82394#1559746, @Sparker wrote:

I have a Gametrix ECS throttle which is a separate USB device and it always makes ARMA believe that its main axis is a modifier, which makes absolutely no sense for me. The throttle axis doesn't have any center point.
Almost two years and still no fix for this, it's unbelievable.

Thank you for the report. We are aware of the issue and are looking into it.

I have identical issue.

I think your picture didn't upload.

I am serious. Users report that this same error occurs in other games as well so it is very likely that the OS is screwed from the last update.

Thank you for letting us know. Indeed the latest update from windows screwed some games. If it is happening in other games then it is highly probable that the OS is screwed.

So just to summarise. Even after resetting the layout and doing the custom layout anew breaks the panels. Correct?

This issue is not fixed or has begun reoccuring. unable to zoom with any scope that has an adjustable zoom no matter how many times i hit + or - on the numpad.

I get the same errors.
I'm on Windows 10 build 16299.
I have a GTX 960m and Intel HD graphics 530.
The game essentially crashes while attempting to create a DX11 device with my Nvidia card.
I rolled back my graphics drivers for both cards. With the older Intel driver, the game appropriately chooses to run on my Nvidia graphics card. When I update my Intel drivers, Arma ignores my Nvidia card and runs (at 10 FPS) off my integrated graphics.
I can't roll windows back to a previous version.
I have a friend who also has build 16299 and a GTX 1060 and no integrated graphics, and the game runs fine for him, save some occasional hangs. This leads me to believe the problem is related to dual graphics cards machines, especially Nvidia 900 series and below.
Attached are my logs and a screenshot of the relevant crash info.

In T124802#1657269, @Neology wrote:

Some servers seem to have "found their own fix" you'll have seen them posting here prior but no longer mentioning it (rpuk)

hope you don't mind Bamf, i'm quoting you on our forums as people are saying its "just us"

@joaovitorpina I can't roll back :/ my update was from some build of Windows 10 to build 16299. I'm not sure why I have such a weird build number, but since my Windows update, Arma update, and subsequent driver updates all took place in the same week I couldn't be sure which update was the cause. I am just gonna have to wait for the Arma update and hope it solves everything...it better be playable within the next two weeks, I'll rage at Bohemia's doorstep nonstop if I can't play Arma all winter break.

Turns out that returning to the Default Layout for HUD elements fixed it. This can be marked as resolved.

Actually managed to get a wireshark capture as it crashed, was doing it for my ISP to see if there was anything their end... @Dwarden I can provide if needed.

Test, test, papuc, test

The problem is solved. Thank you. Close this ticket.

The problem is solved. Thank you. Close this ticket.

The problem is solved. Thank you. Close this ticket.

@dedmen, I have trying that but no luck. :/

There should be a new update with a fix for problems with ports and BattlEye, could you please let us know if the issue still persist?

I am looking at the wiki right now, I am going to try to confirm on how should the AI act when in Aware mode, however the second part of your report.

Thank you for the report. We are aware of this issue and are looking into it.

We do have sonic booms with Shikras at the moment, and the other Jets DLC aircraft are able to produce 'distant rumble' sonic booms, but the nearby booms for those aircraft seem to be glitched at the moment. Bohemia is working on that here: https://feedback.bistudio.com/T124855

The problem is solved. Thank you. Close this ticket.

Thank you for the report. I am looking at your dumps and you have -noLogs which means we can't see what was happening before the crash occurred.

The problem is solved. Thank you. Close this ticket.

@Wulf In your picture I circled two objects, I often get stuck there

Just wondered if you were also going to add the performance version as well like you have in the past?

Now that profiling build is out and Arma is somewhat stable. Yeah. Set myself a reminder to do it this evening. ~10 hours from now.

Hi Dedmen, so the arma 3 updated there arma3server version. Is there anyway you could unlock the fps on the new version and show how you do it? :) Thanks in forward.

Some servers seem to have "found their own fix" you'll have seen them posting here prior but no longer mentioning it (rpuk)

Well I have 2 file . ı searched for a some problem first ı saw some nvidia file (D3D10) and ı install directx again.I tried to launch a game but this time Arma cant find the problem(unknown module) . Now I'm sure this problem about the last update ı hope you'll find the problem soon.Good Luck :)

Thank you for the report, we ill have a look at

The latest update does not appear to have fixed the BE mass kick issue for Asylum. In the last 72 hours we have had approximately 13 such mass kicks with the same messaging as before the 1.78 patch.

I have not had the error since I posted this. I later that day switched to playing Fullscreen Windowed from Fullscreen and it seems to have stopped it for now. The only thing I can say going forward Wulf, is that based on this issue showing up for other games (PUBG, CS:GO, Paladins these were the games on the first Google search for bad module_info) it's looking more like a Windows issue, not with Arma.

here is picture, normal basic offroad, speed around 80-120 i think

The users who I am in contact with who had this problem were having trouble with radar, mini map, mine detector, sling load, picture in picture (helicopter/ground vehicle), uav. They have been able to fix the problem by reset of their layout to standard mode however the new resize function breaks the info panels once again.

So, We'll wait a update to game. I hope the game update soon

I am not sure that i understand what the issue is. Could you please explain?

By info panels you mean what exactly, hints or the layout of radars and sensors? Screenshots would be very appreciated.

Sort of fixed by Laws of War DLC.

Thanks for the response Wulf.

（1） Two questions
{windows10 1709version Bit64 1709】
Unable to hit text in games with text automatically flashing to the desktop
Here can not be used Chinese Meeting Exit to the desktop
I can't input any words in this game Chinese characters
（2）
Quitting the game in the game Sandbox server will cause the game to crash！ Use game Chinese
附件(2 个)

Sorry jako!!!
To nemyslíš vážně???

Thank you for the report. First, please try these possible solutions here.

Thank you for the report. Indeed it is caused by the new port configurations by BattlEye , we are also working on it and trying our best to remedy the situation. There are some community workarounds, we advise you to use them for now, until this gets fixed.

Thank you for the report. Can you please send us your Arma report? It contains potential dumps. Here's how to do that.

Thank you for the report, we will contact the designers and will have a look at this.

when you give the drone a command by right clicking the waypoint.

Hello LeonardoXD and thank you for the report.
If it is not a problem for you, could you make a video of the issue for us?
Regards,
Geez

That I am afraid we cannot do. The only time the adverts shows is when you are using premium content from the DLCs, so if you do not want the adverts to pop up, but do not want to buy anything, then simply do not use the premium content that belongs to the DLCs.