Stoneworth — 08/14/2024 12:12 AM

Running the profiling branch of the arma server. Having an issue with a .rpt file reaching sizes of 50+GB within a few hours, bringing down the VPS with it.

By the looks of it the file is doing the
Ref to nonnetwork object... ... .p3d

THOUSANDS of times.

And by looking into the .rpt file, it seems like the file is in a loop with approx. the same amount of local only objects in the game as are referenced in the file.

Fhqwhgads — 08/27/2024 6:03 AM

Dedicated server had a couple of
Out of memory. Your swap file is too small, only 5 MB of free space left. Increase your swap file size or delete some files from your hard disk.

Hard drive was 95% full with ~60GB free when it first happened (it was full when I was managing mods, made room with that 60GB), then it happened again after I freed up more space to ~360 GB free. Maybe the page file didn't update because I didn't restart, but is there a memory leak happening, and could it be related to the 45 lines/sec of "Ref to nonnetwork object 1902be6eb00# 1822730: <no shape>SuppressTarget" since server start? Page file was system managed on that hard drive supposedly at 16MB min and ~24GB max. This never happened before but it's been 6+ months since last server start when the drive probably wasn't full.

18:39:02 Ref to nonnetwork object 1790554: shell.p3dSh_82mm_AMOS

Ref to nonnetwork object Agent 0x0000025B6C51E0C0

In T185773#2691482, @introdevious wrote:

Considering windows server 2008 was sunsetted in 2020 you can’t expect them to continue support for it.

Considering windows server 2008 was sunsetted in 2020 you can’t expect them to continue support for it.

Patch/Fix seems 100% affective as far as the vehicle damage issue goes.
Video Comparison if wanted.

The issue of dragging magazines from the rifle into your backpack and the mag disappearing is still happening at a 100% fail rate.

Just tested with the new update. The first magazine I reloaded disappeared. It was a full magazine. I then fired my gun. Several reloads are now working fine. However, the first reload if you do not fire still disappears.

Can confirm it works in SP until you use the command radioChannelRemove and wait before you add to the channel again.

Well yes. The game updated. its now a different version.
The tool Lou posted above, can probably update your savegame.

The patch is out now, please confirm fix

In T185482#2689550, @dedmen wrote:

I need that file, please pack it in a zip and also upload it here

Thanks. Here you are:

As far as I know, that message is exactly why I couldn’t play. Someone is Jsoc found a work around. Someone that was successfully playing on the server sent me their .pbo folders for the server and I can now play. I am not the only person that had this issue, there were multiple people with the exact same message and couldn’t play.

Confirmed in current stable, singleplayer and localhost MP, both with provided mission and a trivial custom one where I simply remote control a unit, release it and then spawn an enemy unit in front of it. After being remote controlled, the unit aims but does not shoot at enemies.

Revision: 152303

This task can be closed. I have been informed through SaMatra (Individual who works on / produces KOTH, tightly knit with RHS and you guys) that this issue has already been fixed in the Profiling branch, and the fix will be sent in the next patch.
Thank you and sorry if you spent the time reading this, I was not aware it was fixed already.

14:25:57 "Client applied velocity [0,0,100]"
14:25:57 "Server applied velocity [0,0,100]"
14:25:57 "Client velocity [0,0,94.8551]"
14:25:57 "Client velocityModelSpace [-54.7455,-54.7723,54.776]"
14:25:57 "Server velocity [0,0,94.8551]"
14:25:57 "Server velocityModelSpace [-54.63,-54.6486,55.0144]"
14:26:06 "Client applied velocity [0,0,100]"
14:26:07 "Server applied velocity [0,0,99.9183]"
14:26:07 "Client velocity [0,0,95.0184]"
14:26:07 "Client velocityModelSpace [-54.8397,-54.8667,54.8703]"
14:26:07 "Server velocity [0,0,94.9368]"
14:26:07 "Server velocityModelSpace [-54.583,-54.6015,54.967]"

The message, is not the reason that you cannot play. There must be another reason.

I have attached a file including the error message

note: Minidump has been generated into the file C:\Users\pod\AppData\Local\Arma 3\Arma3_x64_2024-10-14_15-29-54.mdmp

I need that file, please pack it in a zip and also upload it here

Not much. And I doubt we would have thought to test shooting the huts before it was mentioned by community member

Same for infantry any explosives T82957

In T184979#2682012, @PlayerBot wrote:

Arma 3 Server (App ID 233780) have no other language stringtable.xml as I know,
so if you want change language on server maybe you need to host server from Arma 3(App ID 107410)

In T184979#2682226, @kju-PvPscene wrote:

-language startup parameter should work again with 2.18

Hi guys, it has been 2 weeks, any news for mac users?

Looks like this is a bug in the simulation of "ThingX". The object is "stopped" after 5 seconds, because the game forgets to mark it as "moved". (it keeps getting moved and immediately stopped in the same frame...)
A simpler example:

ABCDEF = "Land_Football_01_F" createvehicle getPosATL player;
ABCDEF setVelocity [0,0,100];
TimeCreated = time;
TimeStopped = nil;
onEachFrame
{
	systemChat str [velocity ABCDEF#2, velocityModelSpace ABCDEF#2];
	if (velocity ABCDEF#2 == 0) then
	{
		if (isNil "TimeStopped") then {TimeStopped = time};
		systemChat str (TimeStopped-TimeCreated);
	};
}

Olden but golden. I looked a litte bit into numbers and what the debug console gave me.

Does this mean the developers are using a new compiler or new compiler flags starting with v2.18?

Maybe related:
https://developercommunity.visualstudio.com/t/Illegal-Instruction-SSE-42-POPCNT-exc/10520578

Аfter update 2.18 the problem seems to be solved

In T185482#2686852, @Leopard20 wrote:

It appears this is due to a POPCNT instruction
F3 0F B8 C0 = popcnt eax,eax

based on some Googling, it looks like yeah Core2 Duo doesn't support it

Revision: 152295

It appears this is due to a POPCNT instruction
F3 0F B8 C0 = popcnt eax,eax

Or maybe this?
https://support.microsoft.com/en-us/topic/fix-programs-that-are-built-in-visual-c-2013-crash-with-illegal-instruction-exception-d1d72972-1578-801e-27f1-3c795e662364

Could it be this problem?
https://stackoverflow.com/questions/59584105/illegal-instruction-from-vs-c-on-windows

Revision: 152294

rev 152283

I found the revision when something changed that caused this, but this was back in May, you guys dont use dev at all?

Hi, I keep getting: Cannot load texture mpmissions\__cur_mp.altis\media\images\77th_jsoc.jpg.