Done the two steps now. Wasn't running latest driver. Sorry for the bad upload service, using uploadfiles.io from now on.

+100

Unfortunately I am unable to download the report file as it has been marked as malicious.
Would you mind uploading the file again?

could you please try to use the 32bit executable to see whether this issue persists even there?

Could you please try to switch to the development or profiling branch?

Okay no big deal! Thanks! I will most likely switch back to the dev build anyway because I prefer 64 bit.

@DanielNL, you may have already tried these, but just to confirm have you tried the following?

In T122227#1550369, @TheMasterofBlubb wrote:

As a small hint the pagefile is a buffer. Windows shows that message when about 50 %of the available memory (physic and pagefile )

After further investigation, I was wrong, I assumed that I wasnt unsubscribed from everything due to the amount of mods I have, turns out I was randomly unsubscribed from them...

happening on GTX 1060 (6GB).

Hi, it's actually my fault, because it's based on the development branch version, so Launcher is expecting the 64-bit executable in the installation folder. I'm sorry, I focused too much on the problem at hand and forgot about this "little" detail. I'll fix it tomorrow first thing in the morning, but you can workaround the error message by copying the arma3.exe as arma3_x64.exe to give Launcher what it expects.

I tested it and everything seems to be working fine from what I can see. The only thing I noticed is that it said it was unable to find the arma executable when opening the launcher but I would assume that is because I didn't move it straight into my arma 3 folder and just ran it from my desktop.

Yeah I checked the workshop folder and all the files had disappeared there barring a few, namely my ACE3 Optional mods(ADR-97, RHS, Smoke, Tracers), they needed a new folder in order for them to work so I just created new ones for them following ACE3's instructions for their setup. Im not quite sure how I attach any files though, care to explain? I did clear my download cache though.

Hello,
could you please try this version: http://arma.jiripolasek.com/files/Launcher_999901.zip ? I believe that I've pinpointed (and fixed) the problem.

Okay no problem. If you need any other help feel free to ask. I don't mind at all.

As a small hint the pagefile is a buffer. Windows shows that message when about 50 %of the available memory (physic and pagefile )

The latest Drivers are already installed.

Remove the fog from the chamber window.
In any setting, the general visibility, PIP window will show the fog at a distance of 1500 meters.
Create a new ticket for Arma3 64bit, or have the opportunity to return to this revision?

All MOD downloaded from Steam are always in the folder:
Disk:\Program files\Steam\SteamApps\common\Arma 3\!Workshop
Check the contents there.

Hello James,
yes, you're safe to use the older Launcher, at least for now. As for the other versions I want to test them before I send them to you, to not bother you needlessly, but my Steam is currently acting up and I'm trying to make it work again.

Hello edog1234567,
can you please go to: Steam / Settings / Downloads and click on Clear download cache?

In T122248#1550316, @Jawsh wrote:

Okay. Did any of the solutions in the link help with the issue?

Okay. Did any of the solutions in the link help with the issue?

In T122248#1550201, @Jawsh wrote:

@Phenya, try these possible solutions for 0xC0000005 - ACCESS_VIOLATION.

== "D:\Ivan\Games\SteamLibrary\steamapps\common\Arma 3\arma3.exe" -skipIntro -noSplash -cpuCount=4 -maxmem=2047 -world=empty "-mod=D:\Ivan\Games\SteamLibrary\steamapps\common\Arma 3\@task_force_radio;D:\Ivan\Games\SteamLibrary\steamapps\common\Arma 3\@WARZONE"

Also try playing without mods if you can. This is to help rule out a mod or mods being the cause of the issue.

In T122256#1550255, @Jawsh wrote:

This issue has already been reported: T121843, T121792, and T121931. Please search before submitting a new issue.

This is still a problem in 1.66 and in
Launcher version: 1.5.139755
Game version: 1.67.139743
Branch: development

duplicate of T58803

This issue has already been reported: T121843, T121792, and T121931. Please search before submitting a new issue.

In T122227#1550091, @TheMasterofBlubb wrote:

Do you have Pagefile active?

In T119628#1549713, @Jawsh wrote:

In T119628#1549627, @moosemilker wrote:

This is still happening today.

I am sure the developers will appreciate more crash dumps. ;)

Did you still me to test those other launchers for me? Also should I just use this launcher from now on?

Are your graphics card drivers up-to-date? See www.geforce.com/drivers for the latest nVidia GeForce drivers.

Yep already done.

Same crash on latest exp.

@Phenya, try these possible solutions for 0xC0000005 - ACCESS_VIOLATION.

@Deutschmaschine, have you tried verifying the integrity of the game cache?

O.k. here is what i did to fix it

The same here, since the last update I can not connect to any server, official and unofficial. Try the normal procedure to eliminate possible problems, load the game without mods, check cache, delete profiles, update, etc. Nothing seems to work or have any effect, I attached my report.rgs

Do you have Pagefile active?

can't attach the zip files which arma created me -.-

Thank you thank you very much @Jawsh for mentioning this in those tasks!!! :) Hope BIS will fix this next week...

Yes the vanilla one, maybe I just need to turn on FSAA x2

Hi Straiker,

I haven't tried recently, but I suppose it still fails. Sorry.
The reason why I removed my comment was because I don't know if it was accurate enough and I wanted to do more research. Some explanation:

I can confirm that - same issue.

Thats fantastic, thank you!

In T122147#1549373, @PabloTheGreat1 wrote:

battleye folder that I can find including the current arma 3 one.
16:30:20 installing Battleye Service ....
16:30:40 Failed to install Battleye Service

No need to remove BattlEye folder - from the root folder Arma3 games.

I noticed on the forums someone is possibly having a similar issue to me. I am using the default memory allocator (not specified any) however.

Troubleshooting report: https://www.dropbox.com/s/tckxmscqqkrl11x/ArmaReport_Log_20161217T080925.zip

@Armamem, could you prepare and upload a troubleshooting report for the developers to review?

In T122227#1549810, @Jawsh wrote:

@Armamem, try verifying the integrity of the game cache for Arma 3.

Also try running System File Checker in Windows 10.

Okay, I'll try these ...Thanks. and BTW it was doing the same before I switched to dev... with or without mods

@Armamem, try verifying the integrity of the game cache for Arma 3.

Reproducibility Have Not Tried

In T119628#1549627, @moosemilker wrote:

This is still happening today.

All arma3.rpt files show:

https://www.dropbox.com/s/vswadlakfncywkg/ArmaReport_Log_20161217T020223_drumn.zip?dl=0 This time the crash occurred while switching from the scenario UI to the main UI.( when I hit the BACK button). And it happens every time since I've switched to dev. 32 bit version

This is still happening today.

In T122072#1549216, @razazel wrote:

C:\Users\<Name>\AppData\Local\Arma 3\

Could you please check out this folder on your PC to see if there are any MDMP files present?

https://www.dropbox.com/s/8g4ppkey28m1z01/ArmaReport_Log_20161216T220215_drumn.zip?dl=0 okay...try that.