Fixed on devbranch

Hello,

i'm afraid i cannot understand what issue you are experiencing. Could you please attach a video / Screenshot or a simple repro misison? Thank you.

Hello,
it is possible that some of your hardware is corrupted and is causing trouble under a full load. It is also possible that you have not experienced this with other games, Arma 3 more performance demanding than most of the today's games. I would suggest to run a couple of heavy benchmarks to see if the problems occur as well.
The most suitable for you could be:
http://unigine.com/products/heaven/
http://unigine.com/products/valley/
http://www.memtest.org/
Please run these benchmarks (at least one hour each without interruption) at highest possible settings. Then you will see if your hardware is showing incorrect behaviour under heavy stress or not.
Thank you very much.

Hello, this issue should be fixed in tomorrows devbuild. Thank you for your feedback.

Hello, unfortunately i cannot reproduce the issue. Could you plese try reverting into your previous mission, complete it and then try Crossing Paths again after it unlocks? Thank you!

Hello, could you please try the solution that Waffle has posted above and see if it works? Thank you.

This was recently changed due to some issues with switching weapons on Tanks that have commander turret.

Thank you for your feedback.

Hello, could you please try changing the weapon using Left Control + Fand see if it works? Thank you.

Hello, could you please attach a .rpt next time it happens? The .rpt file is located here. Thank you.

C:\Users\<Name>\AppData\Local\Arma 3\

Hello, have you tried renaming your ARMA 3 Profile in the Configure > Profiles menu?

Thank you for your feedback.

The bidmp + mdmp files are missing from the zip file. Could you please attach them?

Hey,

Thank you for reporting the issue.
We need crash dump files from this folder to analyze your problem.
C:\Users\<Name>\AppData\Local\Arma 3\
Can you upload somewhere in winrar package, please?
Archive smaller than 5000 KB can be attached directly to the ticket. For bigger archives, please use some free sharing service and post link here.

How to find correct crashdump file:
Try to make the crash happen
Look into crashdump folder
Upload crashdump with latest date in name (crashdump is rpt + bidmp + mdmp file with same name). Please try to provide as many crashdumps as possible, it helps us investigating the problem in a big way.

Thank you.

Hello, could you please reproduce this issue on Official Map and with Official Vehicles? Thank you.

Hello,
it is possible that some of your hardware is corrupted and is causing trouble under a full load. It is also possible that you have not experienced this with other games, Arma 3 more performance demanding than most of the today's games. I would suggest to run a couple of heavy benchmarks to see if the problems occur as well.
The most suitable for you could be:
http://unigine.com/products/heaven/
http://unigine.com/products/valley/
http://www.memtest.org/
Please run these benchmarks (at least one hour each without interruption) at highest possible settings. Then you will see if your hardware is showing incorrect behaviour under heavy stress or not.
Thank you very much.

Hello,
it is possible that some of your hardware is corrupted and is causing trouble under a full load. It is also possible that you have not experienced this with other games, Arma 3 more performance demanding than most of the today's games. I would suggest to run a couple of heavy benchmarks to see if the problems occur as well.
The most suitable for you could be:
http://unigine.com/products/heaven/
http://unigine.com/products/valley/
http://www.memtest.org/
Please run these benchmarks (at least one hour each without interruption) at highest possible settings. Then you will see if your hardware is showing incorrect behaviour under heavy stress or not.
Thank you very much.

Hello,
Thank you for reporting the issue.
We need crash dump files from this folder to analyze your problem.
C:\Users\<Name>\AppData\Local\Arma 3\
Can you upload somewhere in winrar package, please?
Archive smaller than 5000 KB can be attached directly to the ticket. For bigger archives, please use some free sharing service and post link here.

How to find correct crashdump file:
Try to make the crash happen
Look into crashdump folder
Upload crashdump with latest date in name (crashdump is rpt + bidmp + mdmp file with same name). Please try to provide as many crashdumps as possible, it helps us investigating the problem in a big way.

Thank you.

http://feedback.arma3.com/how-to-user.html

Hello,

it looks like the crash dumps were not created (we need rpt + bidmp + mdmp file). It could be that your game actually did not crash or it crashed and was killed off (via task manager) too quickly for crashdumps to create.

Next time it freezes, please try to wait a minute or two so the dumps have time to create. If there are no crashdumps after then, we'll try to find another solution.

Hello, i'm unable to reproduce the issue. Could you please provide more info? Thanks!

Restarted about 15 times. Still no luck reproducing it. Are you running mods by any chance?

Will be fixed in the next Devbuild update!

Hello, please try reproducing the issue on newest Devbuild it should be fixed there. Thank you.

Hello, is this reproducible without mods? If not would it be possible for you to pinpoint which mod causes it? Thanks

Hello, i'm unable to reproduce the issue. Could you please provide more info? Thank you

Hello, i'm unable to reproduce the issue. Could you please provide more info or a simple repro mission?

Thank you very much.

Hello, please see the ticket that Killzone Kid posted. Also try verifying the integrity fo the game cache.

Thank you for your feedback.

Hello, it seems that your Audio Device fails to create when launching the game. Please try reinstalling your audio drivers and see if this fixes the issue.

Hello, could you please attach a dxdiag and .rpt? Also please check if your output is correctly configured.

How to get a dxdiag:
http://www.matrixgames.com/forums/tm.asp?m=1597548

Where to find .rpt:
C:\Users\<Name>\AppData\Local\Arma 3\

Thank you.

Hello,

Please refrain from duplicating issues, the reason why the last ticket was closed is because hiding backpacks while wearing a ghillie is not a bug

Thank you for your feedback.

Hello, we are aware of this issue but unfortunately it is not fixable at the moment. Thank you for your feedback.

Hello, i'm unable to reproduce the issue. Could you please provide more info? Also make sure you did not kill one of your friendlies during the mission by accident.

Hello, we are currently investigating the issue. Could you please provide us your dxdiag so we can make sure its not drivers related? You can find how to get your dxdiag file here:
http://www.matrixgames.com/forums/tm.asp?m=1597548

Hello,
it is possible that some of your hardware is corrupted and is causing trouble under a full load. It is also possible that you have not experienced this with other games, Arma 3 more performance demanding than most of the today's games. I would suggest to run a couple of heavy benchmarks to see if the problems occur as well.
The most suitable for you could be:
http://unigine.com/products/heaven/
http://unigine.com/products/valley/
http://www.memtest.org/
Please run these benchmarks (at least one hour each without interruption) at highest possible settings. Then you will see if your hardware is showing incorrect behaviour under heavy stress or not.
Thank you very much.

Hello, we are currently investigating the issue. Could you please provide us your dxdiag so we can make sure its not drivers related? You can find how to get your dxdiag file here:
http://www.matrixgames.com/forums/tm.asp?m=1597548

Hello,
it is possible that some of your hardware is corrupted and is causing trouble under a full load. It is also possible that you have not experienced this with other games, Arma 3 more performance demanding than most of the today's games. I would suggest to run a couple of heavy benchmarks to see if the problems occur as well.
The most suitable for you could be:
http://unigine.com/products/heaven/
http://unigine.com/products/valley/
http://www.memtest.org/
Please run these benchmarks (at least one hour each without interruption) at highest possible settings. Then you will see if your hardware is showing incorrect behaviour under heavy stress or not.
Thank you very much.

Hello, can the issue be reproduced only on community made gamemodes?

Hello,

We are aware of this issue, unfortunately we cannot address it right now due to the limitation of the engine.

Thank you for your feedback.

Hello and thank you for your ticket. This is intended change due to some bug fixing we did in squad.xml. You will have to make multiple squad.xml files. Sorry for any inconvenience this might have caused.

Have a nice day.

Hello,
could you please verify your game files and Arma tools files via Steam?
https://support.steampowered.com/kb_article.php?ref=2037-QEUH-3335

Thank you.

Hello,
it is possible that some of your hardware is corrupted and is causing trouble under a full load. It is also possible that you have not experienced this with other games, Arma 3 more performance demanding than most of the today's games. I would suggest to run a couple of heavy benchmarks to see if the problems occur as well.
The most suitable for you could be:
http://unigine.com/products/heaven/
http://unigine.com/products/valley/
http://www.memtest.org/
Please run these benchmarks (at least one hour each without interruption) at highest possible settings. Then you will see if your hardware is showing incorrect behaviour under heavy stress or not.
Thank you very much.

Hello, we are currently investigating the issue. Could you please provide us your dxdiag so we can make sure its not drivers related? You can find how to get your dxdiag file here:
http://www.matrixgames.com/forums/tm.asp?m=1597548

Hello,
Thank you for reporting the issue.
We need crash dump files from this folder to analyze your problem.
C:\Users\<Name>\AppData\Local\Arma 3\
Can you upload somewhere in winrar package, please?
Archive smaller than 5000 KB can be attached directly to the ticket. For bigger archives, please use some free sharing service and post link here.

How to find correct crashdump file:
Try to make the crash happen
Look into crashdump folder
Upload crashdump with latest date in name (crashdump is rpt + bidmp + mdmp file with same name). Please try to provide as many crashdumps as possible, it helps us investigating the problem in a big way.

Thank you.

http://feedback.arma3.com/how-to-user.html

Hello, i'm unable to reproduce your issue. Could you please provide more info thank you!

Hello, i'm unable to reproduce the issue you have descibred. Could you please provide more info? Thanks!

Hello, try reproducing this issue without mods. Thank you!

Hello, can you try reproducing it on newest Dev Branch? Thank you.

Hello,
Thank you for reporting the issue.
We need crash dump files from this folder to analyze your problem.
C:\Users\<Name>\AppData\Local\Arma 3\
Can you upload somewhere in winrar package, please?
Archive smaller than 5000 KB can be attached directly to the ticket. For bigger archives, please use some free sharing service and post link here.

How to find correct crashdump file:
Try to make the crash happen
Look into crashdump folder
Upload crashdump with latest date in name (crashdump is rpt + bidmp + mdmp file with same name). Please try to provide as many crashdumps as possible, it helps us investigating the problem in a big way.

Thank you.

http://feedback.arma3.com/how-to-user.html

Hello, we are currently investigating the issue. Could you please provide us your dxdiag so we can make sure its not drivers related? You can find how to get your dxdiag file here:
http://www.matrixgames.com/forums/tm.asp?m=1597548

Hello,
Thank you for reporting the issue.
We need crash dump files from this folder to analyze your problem.
C:\Users\<Name>\AppData\Local\Arma 3\
Can you upload somewhere in winrar package, please?
Archive smaller than 5000 KB can be attached directly to the ticket. For bigger archives, please use some free sharing service and post link here.

How to find correct crashdump file:
Try to make the crash happen
Look into crashdump folder
Upload crashdump with latest date in name (crashdump is rpt + bidmp + mdmp file with same name). Please try to provide as many crashdumps as possible, it helps us investigating the problem in a big way.

Thank you.

http://feedback.arma3.com/how-to-user.html

Hello, please take a look into current dev branch the issue should be fixed. Thank you.

Hello, could you please provide the video? Thank you very much.

Hello,
Thank you for reporting the issue.
We need crash dump files from this folder to analyze your problem.
C:\Users\<Name>\AppData\Local\Arma 3\
Can you upload somewhere in winrar package, please?
Archive smaller than 5000 KB can be attached directly to the ticket. For bigger archives, please use some free sharing service and post link here.

How to find correct crashdump file:
Try to make the crash happen
Look into crashdump folder
Upload crashdump with latest date in name (crashdump is rpt + bidmp + mdmp file with same name). Please try to provide as many crashdumps as possible, it helps us investigating the problem in a big way.

Thank you.

http://feedback.arma3.com/how-to-user.html

Hello, i'm unable to reproduce the issue. Try disabling any mods and try again.

Hello, does this happen on unmodded version of the game? Thanks!

Hello, we are currently investigating the issue. Could you please provide us your dxdiag so we can make sure its not drivers related? You can find how to get your dxdiag file here:
http://www.matrixgames.com/forums/tm.asp?m=1597548

Hello,
Thank you for reporting the issue.
We need crash dump files from this folder to analyze your problem.
C:\Users\<Name>\AppData\Local\Arma 3\
Can you upload somewhere in winrar package, please?
Archive smaller than 5000 KB can be attached directly to the ticket. For bigger archives, please use some free sharing service and post link here.

How to find correct crashdump file:
Try to make the crash happen
Look into crashdump folder
Upload crashdump with latest date in name (crashdump is rpt + bidmp + mdmp file with same name). Please try to provide as many crashdumps as possible, it helps us investigating the problem in a big way.

Thank you.

http://feedback.arma3.com/how-to-user.html

The bug is scheduled for a fix don't worry :)

I have no issues using Logitech Extreme 3D pro. Have you tried putting the Stick slider into the middle?

Hello, please make sure your joystic is centered before attempting to rebind the keys. Thank you

Hello, try resetting your control presets you can do this by going to: Configure -> Controls -> Presets -> Select Arma 3 and press OK.

Hello, i'm unable to reproduce the stretching issue on direct and dedicated server. Could you please provide more info? Thank you.

I'm sorry but we cannot fix issues regarding mods. Please try contacting the development team of the mod and see if they can do something about it.

Thank you for your feedback.

Hello, is this issue reproducible without mods in a mission created in a editor?

Thank you!

Hello, this is due to the fact that the Breaking Point launcher does not launch arma3battleye.exe. As it is a mod we cannot do anything about it. The devs of the mod have to fix this nasty issue.

Thank you for your feedback.

Glad to hear that!

So, everything is working fine without any issues?

Could you please try to compile the map on the new Binarize and see if that improves anything?

So the game is not crashing if you are not using .bat to launch the game, am i correct? Would that pose a problem for you if you stopped using the .bat file?

What kind of issue you have discovered in the .bat file? Also what do you mean by 60fps? The City Life RPG Was running 60 fps in editor?

Is the low FPS happening on Bornholm or Altis?

We are launching the game with following method: Launching the Steam DEV version of the game using Total Commander with following parameters:

arma3.exe -window -nosplash -mod=@citylife3;@citylife3cba_a3;@citylife3com;@citylife3core;@extdb;@citylife3_TFR

We also tried it launching normally with those parameters but still were unable to reproduce the crash. Any idea of what we are doing differently?

Our team is looking into your issue. Right now only thing that would help is the .RPT of one of the people that were affected.

Could you please get an RPT from some other person that is experiencing these crashes? Thank you.

I was able to load the mission from Editor on Steam Dev without any freeze occuring.

Thank you. We will get on this ASAP.

Hey, i was unable to reproduce the crash on Dev and Stable. Could you please specify exactly what you did for the game to crash / freeze? i tried it in single player / editor / multiplayer with no luck. Thank you very much!

Is it crashing for you just with the files you have provided me?

In this case please review your scripts. If you would find anything suspicious, we are still willing to assist you. However without example (or without data we requested) of faulty behaviour, it is not possible for us to track down issue, at least not at this moment.

Hello, please consider providing us the mod files for the City Life RPG so we can reproduce this issue and investigate it. Without them there is unfortunately not much we can do.

Task Force Arrowhead Radio 0.9.7.3
Arma 3: City Life RPG 3 Server Scripts
Arma 3: City Life RPG 3 Admin
Arma 3: City Life RPG 3 Community Files
Arma 3: City Life RPG 3 Core Files
Arma 3: City Life RPG 3
Community Base Addons v1.1.20
@extDB

You can send the download link for the mod files to: [email protected]

The issue is scheduled for a fix. Thank you for your patience.

Please understand that in order to reproduce issue and track it down for sure we really do require those files. We can not do too much unless you will assist in this matter. We regret you are having issues but we will happily assist if you would be so kind and provide the requested code. Your feedback is appreciated and we hope in good cooperation in future.

Hello, please try reproducing this issue without running any mods. Thank you.

Hello, i'm unable to reproduce the issue. Can you please provide more info? Thank you.

Hello, im unable to reproduce the issue. Could you please provide more info? Thank you.

Hello, the code for the init field you have provided is not working. Could you please check if it is typed correctly? Thank you!

Hello, the waypoint height does not determine how high the plane / heli will be flying. If you want the vehicle to fly at certain height please see the following link.

https://community.bistudio.com/wiki/flyInHeight

Thank you for your feedback.

Hello, please try the solution that PapaReap posted

You can also find more info here: http://forums.bistudio.com/showthread.php?190426-BattlEye-service-implementation

Thank you.

I'm still unable to place a backpack into another one. Are you by any chance running any mods?

Hello, i'm unable to put backpacks into another backpack on the new Stable update. Could you please check if the issue is still present? Thank you.

Hello, this is because there were quite a few issues regarding this interaction and therefore it is no longer possible to stack backpacks into each other.
Thank you for your feedback.

Hello, unfortunately if it is a issue with mod we cannot fix it. The mod creators have to fix these issues. Please consider contacting them.

Thank you.

Hello, please wait for servers to update too then try again. Thank you.

Hello, please try the follwoing profiling .exe the issue is fixed there. Thank you!

You can find them here: http://forums.bistudio.com/showthread.php?169944-Arma-3-STABLE-server-1-44-quot-performance-binary-quot-feedback&p=2576005&viewfull=1#post2576005

Hello, i'm unable to reproduce your issue. Could you please provide more info? Thank you.

Unfortunately both of these issues cannot be fixed at the moment due to the nature of the Revive system and how it is implemented.

Thank you for your feedback

Hello, i was unable to reproduce the issue regarding the GL carrier vests. Could you please provide more info? Thanks!

Not a bug

Explanation:
The position at which the line starts is the position of the bullet saved right after "Fired" eventhandler was triggered. Artificially lowering the starting position wouldn't work either because it wouldn't connect properly with the rest of the visualized ballistic curve.

Hello, i'm unable to reproduce this issue. Could you please provide more info? Thanks.

Hello, could you please provide a path for respawn_guerrila? Thank you.

Hello, could you please try reproducing the issue on unmodded version of the game? Thank you.

Hello,

THis issue is probably caused by mods. Try disabling them and see if that fixes your issue.

Thank you.