Re: menus taking ages to open - turns out my profile was so bloated with variables in the namespace that it took ages to load pause menu and other data, so that was my bad.

Hope this helps anyone else who has any similar issues.

Closing/please close.

Thanks.

Hello, we are sorry you are experiencing issues with our game.
Could you please export your game log files from the launcher?

Steps on how to export logs from ARMA 3 Launcher:

1. Start ARMA 3 Launcher
2. Click the Hamburger menu tab in the launcher (Top right corner. Next to Options (Cog wheel icon) and Minimize Button)
3. Drop down menu will appear
4. Select: Prepare Arma Troubleshooting error and save those files
5. A notification will pop up with the name of the generated file

Please note that the files might take a while to collect.

Attach the generated files to the ticket. If the files are too big please use some free file sharing service.

Do not use MP server filters, the default settings

Hello,

please try to clear you MP server filters.

Let us know if this helps, thank you

@razazel http://feedback.arma3.com/view.php?id=25219

Hello,

thank you for your feedback. Unfortunately I was not able to repro this, when using this command. I was able to see the objects at 1700 just fine.

Are you running the game with any mods? If so, try to disable them and check again.

When testing this, it is important that you pick a place and objects that are visible from your position. To test the command properly, try to set View Distance to 2000, find an object that is approximately 1700 m far and visible from your position. Then run the command with 1700 value. You should see objects that are further then 1700 meters disappear but still see the rest.

Thank you

Hello,

could you please try to switch to Steam Dev and see if the problem is still present?

You can find how to change to Steam Dev here:
http://forums.bistudio.com/showthread.php?149411-How-to-change-Arma-3-branches-between-STABLE-amp-DEVELOPMENT-versions-STEAM-client

Thank you very much

Hello,

thank you for the response. However, we cannot determine what exactly caused your game to crash. It is necessary you triy to run your Arma without any mods. If the crashes still happen then, please send another crashdumps.

If the crashes stop (on Arma without mods), please try to activate mods one by one until you find out which one causes the crashes.

Mods are not official content from Bohemia Interactive and it is very likely that the CTDs you are experiencing are caused by collisions between two or more mods.

Please let us know, thank you.

Before posting an issue deactivate ALL modifications (f.e. Bornholm map) and try to reproduce that issue with the vanilla content.

The developers aren't responsible for non official content.

Hello,

are you experiencing this issue when running vanilla version of the game?

Thank you

Hello,

yes this is a current workaround. This issue should be fixed in the Dev version and should be fixed in the next Stable version.

Thank you again for your feedback.

Hello,

could you please try to switch to Steam Dev and see if the problem is still present?

You can find how to change to Steam Dev here:
http://forums.bistudio.com/showthread.php?149411-How-to-change-Arma-3-branches-between-STABLE-amp-DEVELOPMENT-versions-STEAM-client

Thank you very much

I could solve the issue. I changed back my sound quality settings in windows back to 16 bit 44100 HZ and it's OK now.

Previously I increased the sound quality to 24 bit 192 000 Hz, because I though it wouldn't have any effect on the gameplay. As it's turn out it have. Probably it's related to my sound card and it can't handle that much high quality sounds, but sure.

I will try it. ;)

Caused by the sound settings.

https://forums.bistudio.com/topic/186921-lot-of-tracers-makes-the-game-unplayable-in-mp/

Hey, please try updating your GPU drivers and see if that fixes your issue. Thanks.

@ynpmoose

By default, there is no "gear saving"-feature in ARMA 3 for the multiplayer. These are scripts and modifications that were created by users for users.

Exile is as well a modification for ARMA3.

Please learn the difference between vanilla content and non official content/mods (King of the Hill, Altis Life, Invade & Annex, Exile, Wasteland, DayZ etc., subscribed Co-Op missions, A.C.E.2, A.C.R.E 2, T.F.A.R. etc.)

Hello,

unfortunately there is not much we can do about this as these multiplayer modifications were created by the Community.

It will be up to them to address this.

Thank you

ynpmoose the bug you mean is a different one and already in work. Its a sync bug from server to client with the uniform only. It means Helmets vests backpacks and uniforms are not visually!!! updated.

This is a problem that goes beyond Wasteland and for sure happens in Exile mod as well. Uniform handling is part of the core game.

In Exile, if you pick up your uniform and chest rig from your corpse (other slots seem unaffected) and other players see you naked, you're going to lose them if you log out. It seems like your client knows about the pickup, but the server doesn't; however, if players see you clothed, you're probably OK. It seems somewhat inconsistent.

Wasteland is a multiplayer modification by Sa-Matra.

The developers of ARMA3 can't do anything because you have a problem with non official content.

I agree. I'd only say "leave it up to the mission designer" because I personally don't know the optimal amount of time the sleeps should be in between reactivating each AI feature/simulation. If BI figures out a sweet spot, then it'd be ideal they set that as a default sleep time.

I think it'd be counterproductive to have a shorter performance sleep than they'd recommend (I think about 3 or 5 seconds works fine for now), but being able to still adjust that sleep time like you mentioned would still be nice freedom to have with the command.

No advantage:

• You can spawn units when you need it. It's better than hiding units at start;
• Your "reanimation" script is very heavy!

Very nice find, however, I don't think the mission builder should enable those features manually. In my opinion it would be better if the "createUnitIdle" would handle that aswell.

_unit createUnitIdle [_unitType, _Pos, [], 6, "FORM",_sleep];

_sleep would then be the time it takes for the AI to have all features fully enabled. This could be of course optional, for example if one enters -1 as sleep value then the automatic enabling would be deactivated.

Updated on December 8th, 2016:
Added a check for isServer, included newer AI features to list, and correctly executed the command hideObjectGlobal in the code.

Also included setBehaviour "CARELESS" and "SAFE" so that the unit doesn't become hostile while he's invisible (hideObjectGlobal)

Hello,

could you please look for a RPT file with name arma3_2015-12-15_17-12-27.rpt and attach it to this ticket?

Thank you

Hello,

thank you for the response. However, we cannot determine what exactly caused your game to crash. It is necessary you triy to run your Arma without any mods. If the crashes still happen then, please send another crashdumps.

If the crashes stop (on Arma without mods), please try to activate mods one by one until you find out which one causes the crashes.

Mods are not official content from Bohemia Interactive and it is very likely that the CTDs you are experiencing are caused by collisions between two or more mods.

Please let us know, thank you.

I is no mod on my arma

Solved it. All in ArmA Terrain got broken due to the last patch! I downloaded All in ArmA Terrain Pack Lite and it didn't happen when I tested it! It didn't crash!

So yeah, All in ArmA is bugged for me atleast.

I have the same problem

DX11 error : buffer Map failed : DXGI_ERROR_DEVICE_REMOVED

Code d'arrêt: 0x00000001-UNABLE_TO_INIT_DXGI

Hello, we are sorry you are experiencing issues with our game.
Could you please export your game log files from the launcher?

Steps on how to export logs from ARMA 3 Launcher:

1. Start ARMA 3 Launcher
2. Click the Hamburger menu tab in the launcher (Top right corner. Next to Options (Cog wheel icon) and Minimize Button)
3. Drop down menu will appear
4. Select: Prepare Arma Troubleshooting error and save those files
5. A notification will pop up with the name of the generated file

Please note that the files might take a while to collect.

Attach the generated files to the ticket. If the files are too big please use some free file sharing service.

this is still an issue. can you look into it again please.

Ok, i think i have figured out what triggers this to happen.
I you go into parameters and check box MISSION FILE (EDITOR)
then select a mission to be autoloaded when you start arma,
then this issue occurs.

Hello,

thank you for your feedback. I have tried this on stable vanilla version of the game and was not able to reproduce this issue.

Are you running any mods with the game? If so, please try to run the game without mods. Mods can often be the root of the problem. Should it help, you can try running the game with mods activated one by one to find which of them might be causing these problems.

Should this not help, please verify your game files via Steam?
https://support.steampowered.com/kb_article.php?ref=2037-QEUH-3335

After then, please try to run your Arma as an admin.

Let us know if this helps.

Thank you

Seems to be a duplicate of #0018588

Hello,

thank you for your report and files. It seems that your problem is that DirectX crashes. This may be from various reasons, such as outdated DirectX, outdated drivers, overclocked CPU or GPU [by manufacturer or user] and many more.

Sadly, there is nothing that can be done from our side. I linked this problem to bug number #0000579, where you can read useful tips in comments. Also, please check out the forums page for another useful tips:
http://forums.bistudio.com/showthread.php?147598-Endless-DXGI_ERROR_DEVICE_REMOVED-Crashes

Sorry for the inconvenience, have a nice day.

Well, my guess is that you didn't try the correct one.

1. Go to the editor
2. Place yourself as an engineer
3. Place one of the *HELICOPTER DLC CARGO NETS*: classname: "B_CargoNet_01_ammo_F"
4. Try to blow it up with explosives, or set damage to full in editor
5. Observe nothing happening, crate and inventory is undamaged and accessible

No mods

All the nets I tried do show damage when destroyed.

maybe a simple demo of the issue.

Your right I was looking at the nets in structures.
As it happens even using eventhandlers they're not detecting any hits or damage.

Following aforementioned steps solved issue.

Hello,
please uninstall the Visual C++ 2013 Redistributable package (x86 version), restart your computer (!) and install the package again https://www.microsoft.com/en-us/download/details.aspx?id=40784 (do not use the Repair function).

Silence.....

0023017 totally ignorated. since 9 months.

Duplicate of #0023017

on further testing, when i put another unit down, it allows me to request support, an oversight on my part, so this report can be removed

Thanks for the support Koala, it is appreciated :)

As for the issue madpat3, are you still experiencing these issues?

no, no,
everything's fine. i just have forgotten, that i had locked config Folder. so arma couldn't save the changes i made within the game.