Workaround: go to Steam and opt Arma 3 into legacyports branch using Arma3LegacyPorts as password. This will redownload Apex expansion in suitable format.

@megagoth1702, has the integrity of the game cache been verified?

In T122378#1552734, @barnacledemon wrote:

Ah, I now see what you mean by troubleshooting report. As stated, I am on Linux. Unless I missed the rollout, the launcher is not available for Linux still. Thanks.

Ah, I now see what you mean by troubleshooting report. As stated, I am on Linux. Unless I missed the rollout, the launcher is not available for Linux still. Thanks.

@Jawsh , I did verify the cache with no success. I will upload the report, but for posterity it is also now on my dropbox

@barnacledemon, try verifying the integrity of the game cache.

@SirBoston, try verifying the integrity of the game cache.

In T122332#1552360, @ckapps wrote:

It validated 3 files and said it was validated successfully.

This bug still persists within Linux ports 1.64 version.

Ok after many tests and many other joysticks and configuration edits and developing a joystick which can be controlled over serial on the same host :) ... I don't have the exact cause yet, but I do have a solution. As Roy always stated: "Have you tried turning it off and on again...":

as Jawsh said.

Can I ask you to sent us all your crash dumps please?

The problem persists...

It validated 3 files and said it was validated successfully.

You have the most typical issue. It could be caused by many little discrepancies.
a) Try to use all sloutions mentioned on webpage linked by Jawsh.
b) If we have to resolve your problem please upload some crash dumps to us.
c) Try to move all your missions to another folder (don´t delete) (Documents>Arma3 - Other profiles).
d) Try to return dislocated missions back to Other profiles folder, one by one.
e) Try to launch game always when you return just one mission back.
f) If it does not work try to change your profile to another one.

Hi,
You have the most typical issue. It could be caused by many little discrepancies. Try to use all sloutions mentioned on webpage linked by Jawsh.
If we have to resolve your problem please upload some crash dumps to us.

I've been struggling with this same problem. We are trying to place snipers on the roof of the main building at the Ghost Hotel on Altis. Specifically, we placed one on the small square in the center of the roof. I tried:

Hi,
as Jawsh said. You´ve many mods so:
a) try to launch the game without them
b) try enable mods one by one and launch the game
c) try advices on webpage posted by Jawsh

In T122354#1552181, @seethingword wrote:

Would this effect me joining servers?

In T122354#1552180, @Jawsh wrote:

In T122354#1552176, @seethingword wrote:

Already tried all of them

My next suggestion would be for you to try updating to and running the profiling branch or development branch of the game. Note that the development branch can require large downloads so avoid if you have limited bandwidth.

profiling branch (special performance + profiling build - requires access code: CautionSpecialProfilingAndTestingBranchArma3), alternative download of needed binary possible from Dwarden's dropbox

Would this effect me joining servers?

In T122354#1552176, @seethingword wrote:

Already tried all of them

Your RPT says ErrorMessage: DX11 error : CreateTexture failed : E_OUTOFMEMORY.
We will try a few steps and see if they work.
a) try to change your x64 memory allocator via Launcher parameters (try all)
b) try to set some high -maxmem= and -maxvram= parameters
c) try to renistall your DX11
d) try to reinstall and update your mods

And I'm on Windows 10 not 7

Already tried all of them

@seethingword, try all of these possible solutions.

Well, rollback to older drivers didn't work to you. Please return your settings to original that you had before changes. We will see what your dumps say to us and ehat can we do.

First, try to launch standard Windows update (automatic installation)
Second, visit this page a follow the steps for manual installation described there.

there are another 2 allocs (jemalloc_bi and windows default) so try them if you can. Can I ask you for some dumps? We have just your RPT and If we have to resolve your problem we need crash dumps.

@ckapps, verify the integrity of the game cache.

Isn't tbb4malloc_bi already the default allocator? It seems to be one of the few memory allocators that allow me to play Arma 3 without what we usually call 'memory leaks' (when we get those 4 FPS all of a sudden). The other parameters were activated by Arma 3's recommended optimization thread, so I could get a better performance in-game. I'll try that anyway.

Hello Alwin. First of all. Thanks for all that possible solutions and help.

I´ve checked your report and your memory sometimes fall down. It could have these causes
a) you have a faw hdd space so try to uninstall some file or another games and try rejoin to KOTH with more hdd space
b) try to update your GPU drivers
c) reinstall Arma 3
d) try to use differen memory allocator than tbb4malloc_bi, for example jemalloc_bi or windows default
e) try to launch the game with System memory limit and Video memory limit parameters

@Alwin, I have reinstalled c++ 2013, changed the memory allocator(you meant the launch options right?). I played the game again for about an hour, and the error popped up again. I am going to try reinstalling DirectX. Do you know how to do that? I need help. Thanks for your previous reply.

I think that my feedback is constructive, but the will of the developer to fix it is not constructive.
My feedback is ARMA3 needs a new engine, they must update...

This is not a place for ranting. This is a place for reporting bug ang giving or getting constructive feedback.

The furthest shot i have witnessed was about 3.6km. ( you're thinking too small )

as Jawsh said. Try to unload all parameters and unplug cpuCount it´s possible that that collapse occuring via this problem. Second, there should be some problem with your mods as report said to me.

I´ve checked your report files. It seems that you haven´t the newest Arma 3 1.66 version. Report shows me some errors with game version so try to keep it up-to-date. Second, try to use advices described by Jawsh.

Your have 0xC0000005 - ACCESS_VIOLATION problem. So try to use these advices.

In T122248#1550891, @Alwin wrote:

Hi thank you for report,

First, send us a new report with crash without mods.
Second, try to verify your game integrity cache.
Third, try to resolve problem via this link with most common problems: https://community.bistudio.com/wiki/Arma_3_Unusual_process_exit

Thanks

Without mods there are no errors.
Errors appear only with the included modifications.
Other players are no errorrs, the modification is installed correctly.

try to set default memory allocator and try to launch game without parameters.

As Jawsh said, try to make steps described in Arma 3 Unusual process exit webpage including DirectX reinstall, set yout memory allocator to default, uninstall Visual C++ 2013 Redistributable a restart your PC. These steps are underlying.
I´ve found C0000005 ACCESS_VIOLATION code at register 1045A5E0 marked as "unknown module" so try steps described in webpage and sent us how it´s working.

Allright. I will do these steps. I will reply if the problem persists or if it gets fixed. Thanks!

@ttyou21, verify the integrity of the game cache.

@tchen2021, try using the default memory allocator by either removing the current parameter (-malloc=system) or replacing it with -malloc=tbb4malloc_bi.

No other game is so CPU depending. Like i wrote it doesnot depend so much on the GPU. 6km view distance is way to much. The furthest shot i have witnessed was about 3.6km. So 6km is still pretty much especially on a weak cpu. Most servers have a lower view distance because of performance.

I don't want to diminish the field of view.
6000 is ideal to not be killed without knowing where the shot came from.
I think the game needs DX12 for to use all kernels or this game need a new engine, this old engine is bad. ( This engine is obsolete. )
The other games I always have 60 fps

Arma 3 will not load to play

need game working ASAP

By the way, I have verified the game cache, updated my GPU and CPU drivers, updated my operating system, and changed the steam "Launch Options" to "-malloc=system ", still not working