Hello,

we are sorry for the issues you are having with the game.

This error is very generic. It may be caused by many issues, such as a hardware malfunction, a virus in the computer, but also an error in the game itself. Possible solutions:

Update the graphics card drivers to a newer version.
Rollback the graphics card drivers to an older version.
Check the temperature of your GPUs and CPUs.
Verify the integrity of the game cache using Steam.
Re-install DirectX.
Uninstall the Visual C++ 2013 Redistributable package (x86 version), restart your computer and install the package again (do not use the Repair function).
Run a Windows System File Check tool to repair corrupted system files.

Thank you

Ok,
There is no mdmp file with that date so I have to wait until next freeze. Thanks.

Hello,

it looks like the crash dumps were not created (we need rpt + bidmp + mdmp file). It could be that your game actually did not crash or it crashed and was killed off (via task manager) too quickly for crashdumps to create.

Please try to look either for mdmp file
arma3_2016-01-09_23-21-30.mdmp

If that file is not present, please next time it freezes, please try to wait a minute or two so the dumps have time to create. If there are no crashdumps after then, we'll try to find another solution.

Thank you

Hello,

please make sure that you are running the latest version of the BattlEye service.

In case of any further problems, please try going through the BattleEye support page
http://www.battleye.com/support/faq/ and if necessary contacting BattlEye support.

Thank you

Hello,

we are sorry you are experiencing issues with our game.

If you are running any mods please try to disable them and try it out. Should the problem occur again, please export your game log files from the launcher (again, without any mod).

Thank you

I think i have found what the cause of the issue is though I don't know if you guys can help me with it. I don't know why but it seems to be a problem with Battleye, because I just played Dayz standalone and it happened there too. The only thing I can think of that Arma 3 and Dayz have in common is Battleye and since those are the only two games that this happens in, I assume it is that. Thank you for responding to me and if I can't be helped further I understand.

Good point Fennek. I also see that it's been acknowledged. Hopefully something will be done to improve the current system, or replace it completely.

@Koala

Not necessarily. The changes I suggested are not mirrors of those suggestions, but more or less a broader view of possible changes which while it does carry elements of the Realistic Wounding System suggestion, is not entirely the same.

Granted, there are many imaginable situations, and of course, I'm not saying you should be able to survive a hailstorm of bullets, which is why I suggested the effects, which would impact overall survivability completely. In a situation in which you're bleeding, there could be a chance of dying or increasing the type of bleeding every 30 second-interval. Bullets would have a 100% chance of causing bleeding, and depending from where, it'd affect how you fare on the battlefield.

We currently have two kinds of damage effects. If you're damaged in the legs, you can only walk slowly, and if you're shot in the arms, your aim is affected significantly. I don't think that these effects are enough when compared to effects in VBS and ArmA 2 and its expansions.

Heavily related to #0003002 (Realistic Wounding System)
and #0007341 (Repeatedly hit on legs or arms should NOT kill you instantly)

it would also make artillery more realistic. Right now, without cover, the 155 covers a huge radius where everyone just dies or gets seriously injured from one hit, making artillery and other explosives way too strong against infantry.

Holy wow it worked! Thanks! How the heck do I give a 5 star rating for this!?!?

Glad the developers could help you with your problem.

Marked as resolved

Sorry about that. I uploaded the new file.

Hello,
your issue is caused by a corrupted DirectX library "c:\windows\syswow64\XAPOFX1_5.DLL". You can try to re-install DirectX (which usually doesn't work), get the file from another computer (you have to get the file from the same folder - SysWOW64 - as there are more file with same name, but different content), or you can run an unofficial hotfix of mine from http://arma.jiripolasek.com/files/DirectX_Fix_For_Arma3.exe

Hello,
could you please run Dependency Walker on "arma3.exe", not on "arma3launcher.exe".

Closing as duplicate, the other one contains more intel: http://feedback.arma3.com/view.php?id=27318

I have attached a virtual reality mission with 3 user actions to reproduce the issue

Hello,

thank you for your feedback. Would it be possible that you attach a simple repro mission that would present the issue?

Thank you

...and if you do add new aircrafts. Please please please, do a few loadout variants! (CAS, CAP, Guns/rockets only?) :)

Copy That. :D

Hello,

thank you for your feedback we will look into this.

/upvoted

I was able to reproduce that texture glitch too.

Hello,

thank you for the response. However, we cannot determine what exactly caused your game to crash. It is necessary you try to run your Arma without any mods. If the crashes still happen then, please send another crashdumps (without any mods). Make sure that rpt bidmp and mdmp files are all present.

If the crashes stop (on Arma without mods), please try to activate mods one by one until you find out which one causes the crashes.

Mods are not official content from Bohemia Interactive and it is very likely that the CTDs you are experiencing are caused by collisions between two or more mods.

Please let us know, thank you.

OK, thanks for reaction - i aquired fault - malloc. Fixed now, ticket can be closed, thanks again!

Hello,

thank you for your feedback and sorry for the trouble you are having with the game.

Please try to reinstall Steam. Also please check whether it is not blocked by any Anti-Virus or a Firewall.

Thank you.

I solved the problem. My first assumption was that BIS_fnc_endMission would automatically take care of doneKeys[] and activateKey, since I've never used that way before.

The solution was to define a key via doneKeys[] in the description.ext, and activate that key at the end of the mission with activateKey.

Hello,

thank you for your feedback and sorry for the trouble that you are having with the game.

This error is very generic. It may be caused by many issues, such as a hardware malfunction, a virus in the computer, but also an error in the game itself. Possible solutions:

Try joining another server, then rejoin the previous one.
Update the graphics card drivers to a newer version.
Rollback the graphics card drivers to an older version.
Check the temperature of your GPUs and CPUs.
Verify the integrity of the game cache using Steam.
Re-install DirectX.
Uninstall the Visual C++ 2013 Redistributable package (x86 version), restart your computer and install the package again (do not use the Repair function).
Run a Windows System File Check tool to repair corrupted system files.

Thank you

Hello,

please try to lookup Arma3 crash report logs (should have rpt, bidmp and mdmp files inside).

It should be located in this folder
c:\Users\<username>\AppData\Local\Arma 3\

The best way would be to run the game without any mods, let the game crash and then select most recent files (three file types mentioned above with same name).

Thank you

I already have inputted the link above on a shared drive to it.

Hello,

we are sorry you are experiencing issues with our game.

Please try to run the game without any mods and get the crashdumps (we need rpt + bidmp + mdmp files).

Steps on how to export logs from ARMA 3 Launcher:

1. Start ARMA 3 Launcher
2. Click the Hamburger menu tab in the launcher (Top right corner. Next to Options (Cog wheel icon) and Minimize Button)
3. Drop down menu will appear
4. Select: Prepare Arma Troubleshooting error and save those files
5. A notification will pop up with the name of the generated file

Please note that the files might take a while to collect.

Attach the generated files to the ticket. If the files are too big please use some free file sharing service.

Thank you

Duplicate of #0003841 (more smoke)

Duplicate of #0017963 (more dust)

Hi Razazel,

thank you for help...
We have Rollback our config Files and all its fine now.
Sorry for this.

CLOSE.

Hello,

we are sorry you are experiencing issues with our game.

Are you running any mods? If so please try to disable them. Should the problem occur again, please export your game log files from the launcher (again, without any mod).

Steps on how to export logs from ARMA 3 Launcher:

1. Start ARMA 3 Launcher
2. Click Options menu
3. Drop down menu will appear
4. Select: Prepare Arma Troubleshooting error and save those files
5. A notification will pop up with the name of the generated file

Please note that it might take some time for files to collect.

Attach the generated files to the ticket. If the files are too big please use some free file sharing service.

We have Problems with this error from middle december 2015.

Hello,

thank you for the response. However, we cannot determine what exactly caused your game to crash. It is necessary you try to run your Arma without any mods. If the crashes still happen then, please send another crashdumps.

If the crashes stop (on Arma without mods), please try to activate mods one by one until you find out which one causes the crashes.

Mods are not official content from Bohemia Interactive and it is very likely that the CTDs you are experiencing are caused by collisions between two or more mods.

Please let us know, thank you.

Hello,

could you please verify your game files via Steam?
https://support.steampowered.com/kb_article.php?ref=2037-QEUH-3335

After then, please try to run your Arma as an admin.

Thank you

Hello,

thank you for the response. However, we cannot determine what exactly caused your game to crash. It is necessary you try to run your Arma without any mods. If the crashes still happen then, please send another crashdumps (again, with no mods running).

If the crashes stop (on Arma without mods), please try to activate mods one by one until you find out which one causes the crashes.

Mods are not official content from Bohemia Interactive and it is very likely that the CTDs you are experiencing are caused by collisions between two or more mods.

Please let us know, thank you.

Some features that are currently WIP will make this more reliable and consistent when released.

Sounds great! Thanks KK.

Any way to avoid magazines ammo counts overwritten with the revive system?

Please see also: http://feedback.arma3.com/view.php?id=26273