I don't see a problem with that solution. Using SRV records like that could work as some kind of shitty matchmaker if you follow the weight and priority parts of the SRV record, but if that is not intended then it's user error. But I'd imagine the main usage would be hosted solutions where multiple servers share the same IP as described by Jaffa, or like @HeroGamers games describes having something like mycommunity.org point to server4.coolgameservers.net, port 23456, both of which wouldn't be degraded by saving the last resolved host/port.

Checked same place from screenshot 1 in my first post, all this items on screenshot placed well and accessible:

Scratch some part of that.
I can use the same connectToServer hack also for the direct connect UI.
So you have to specifically enter domain and port 0 (or manually empty it (it will be default filled with 2302)) in direct connect.
Then it will try to resolve the port via SRV record, if that fails it falls back to 2302 (same as would've happened before if you left it empty or entered 0 manually)

2.20
https://community.bistudio.com/wiki/connectToServer

Hello Traqu.
For the QB issue:
quickBarSlot parameter is case sensitive, please check your file

Hello Abear1440.
The change was stated in patch notes.

Hello BrunoBailoni.
You have to remove the following from your cfgignorelist.xml

Hello t0mst3r.
This is something that has to be resolved by the server owner - see details here https://feedback.bistudio.com/T190640

Hello VerxulTeam.
There is no way for us to tell what happened to the vehicles nor we reimburse any lost vehicles.
Regards,
Geez

Resolved for 1.28

Resolved for 1.28

Resolved in 1.28

In T190640#2784603, @Tankolai1 wrote:

I'm on a community cherno server on Xbox, but I'm still having the same issues. had just finally finished my first base earlier this week, and the 04/03 update just deleted everyone's walls, gates, and towers.

just a few minutes ago, I decided to rebuild two of my walls as I had just picked up more planks. everything went fine, until the server did the daily reset, the very second I finished putting the second wall up completely.

went back into the server after it came back up, and again every single wall, plank, nail I put together had completely vanished, leaving no trace behind.

I'm on a community cherno server on Xbox, but I'm still having the same issues. had just finally finished my first base earlier this week, and the 04/03 update just deleted everyone's walls, gates, and towers.

It's very funny, these are materials that don't work properly under certain light conditions namely the sun.

In T190627#2783973, @Geez wrote:

Hello XL
Can you please send us coordinates for the faulty loot spawns?

This happens all day. That's just the last three.

dropping min in here.

Server weather is set too cold.
Make it warmer.

Instead of leaving it as "None", explicitly setting the single-press keybind to the "Single Click" prefix appears to correct the behavior.

Finally back up. Nitrado fixed the version error and the backup restored the walls. What a day.

The problem was solved like this (another "crutch"):
In the file cfgIgnoreList.xml there are 2 lines like this:
<type name="Watchtower" cheatCheck="1"></type>
<type name="Fence" cheatCheck="1"></type>
deleting these lines solves the problem. but! If you started the server and there were no buildings, then they will not appear. Because the server started without any buildings and recorded this information in its files. So I had to take the mission files from the backup.

I have exactly the same problem. All the buildings of the players have disappeared. Backups could not solve the problem. I don't understand what the problem might be...

In T190640#2784456, @DonutEscobarthee1st wrote:

I'm thoroughly disappointed with the recent patch as it has turned our server into sh**. The only reason I play dayz is to combat my crippling p*rn addiction but if this is what the results of the patch are going to stay as ill just be making my way back to the hub rather than rebuilding 😔

I'm thoroughly disappointed with the recent patch as it has turned our server into sh**. The only reason I play dayz is to combat my crippling p*rn addiction but if this is what the results of the patch are going to stay as ill just be making my way back to the hub rather than rebuilding 😔

What the hell is this?

In T190640#2784433, @chuckclose1 wrote:

deleated those lines, restored from yesterday save under xbox1, server wouldn't show up for me but said it up. had to research it as ip changed. mine is up now. dozens of ppl in the discord say there's still won't show hours latter

In T190640#2784433, @chuckclose1 wrote:

deleated those lines, restored from yesterday save under xbox1, server wouldnt show up for me but said its up. had to re search it as ip changed. mine is up now. dozens of ppl in the discord say theirs still wont show hours latter

cant they do a roll back, and delay the update?

deleated those lines, restored from yesterday save under xbox1, server wouldnt show up for me but said its up. had to re search it as ip changed. mine is up now. dozens of ppl in the discord say theirs still wont show hours latter

we have the same issues going on. deleted those lines, did a rollback, started the server and it hasn't showed up in the community list for 2 hours now.

....but it works on public Game Master servers on PS5 as I said. It's only on private, rented servers where it doesn't. If what you say is correct, why would it work on BI servers and not a rented one? In either case, would this change when mods finally become available for PS5?

Y'all broke a mod that's been around since 2018 and has almost 1.4 million subs, lol

In T189290#2784400, @Ded_Mazai wrote:

@Dirkalot mod for endless running. sorry, the translator didn't translate it correctly.

@Dirkalot mod for endless running. sorry, the translator didn't translate it correctly.

In T189290#2784375, @Ded_Mazai wrote:

@Dirkalot This is related to the old mod, disable it.

In T190640#2784325, @Geez wrote:

If you revert to a backup and delete those lines BEFORE starting the server then everything should load without issues.

I think the backup put my server into the old version? Is there a way to fix this?

spam

@Geez The loot is clipping under the panels because the proto is configured with Flag 32

@Geez What are we supposed to tell our clients when the server has been crashing every half hour for close to 2 weeks, and the latest hotfix is for “farming”?. What progress have you made with this issue considering it is affecting MANY large servers?

Played yesterday for a few hours, slow texture loading with rebar enabled seems to be fixed for me atleast, also 100% CPU usage freezes didnt happen during my play session, still need to do some testing with those for a few more hours.

@Dirkalot This is related to the old mod, disable it.

Bruhhhhh, now players can't jump or hold their breath without taking damage from zombies. Did y'all even test this hotfix?

You know, it really shows a lack of professionalism in this company when they roll out an update that impacts people's servers by changing a major piece of information in the code that deleted everyone's bases, all watchtowers, gates, and fences. The fact that this wasn't announced days, if not weeks, in advance is just unacceptable. It feels very unprofessional and like a fly-by-night operation.

I figured out the problem.

I’ve done multiple restarts. The server shows online but doesn’t show up when players look for it. So I guess whenever that issue resolves itself I’ll know if it worked.

That’s what I’m hoping but starting the server after the backup is taking a looooooooong time lol. I’ll let you know whenever it finally comes up

If you revert to a backup and delete those lines BEFORE starting the server then everything should load without issues.

It’s possible the restore for player progress will work once the lines are deleted. I’ll let you know once it finishes. But someone else had success with it.

I've noticed this as well. As far as I can tell, the issue isn't the game putting the map marker in the wrong place - the map marker object itself (comprising the marker and its text) is incorrectly centred. It's centred on the point between the marker and its text, when it should be centred on the centre of the icon. If you place a marker and then zoom in and out on the map, you can see the marker scaling on this central point. This makes precise marker placement impossible, as its precision is dependant on the current zoom level.

Do you think it will be possible to get these bases restored or is that a lost hope? There’s a lot of people very frustrated that all their weeks of work is potentially gone

I've noticed this same issue since the 1.3 update. It wasn't happening beforehand, and it doesn't happen with freelook. When using freelook (even with TrackIR running), freelook rotation seems scaled correctly regardless of zoom level. When trying to freelook with TrackIR, rotation is scaled correctly while at normal zoom, but seems to be at about 0.5x scale when zoomed in (in other words, you can use TrackIR to turn your character's head 90 degrees to the right, then when you hold down the zoom button, the view will zoom in and your character's head will only be turned 45 degrees to the right - returning to 90 degrees when releasing the zoom in button).

Thank you, we are going to look into this with the highest urgency

And I did remove those two lines as suggested but walls are still all gone. These people didn’t just build them after the patch. They’ve been building them for several days. Just all gone after the patch.

In T190640#2784273, @S2pidMunkey wrote:

This is on our community server. Xbox server. HnC Lootopia. I can get the ip I think if you need it

Fix has been released in todays patch, please let us know.

This is on our community server. Xbox server. HnC Lootopia. I can get the ip I think if you need it