Hello everyone.
Currently we do not plan to address this due to current limitations.

Sovled

Can you launch the executable directly instead of using a shortcut or DayZ Tools? Looks like you might have some CLI arguments passed in that are not correct.
You should navigate to I:\Steam_Lib\steamapps\common\DayZ Tools\Bin\Workbench\ and just double click workbenchApp.exe

Glad to hear you no longer experience the issue! Just out of curiosity, what did fix the problem?

In T182931#2639646, @MWFjUnKiE69 wrote:

Geez,
I have never had this issue until I swapped my SSD, I will give them a try, and report back. I am also now getting functionality back on my LAN server as well with no more texture loss, so perhaps it is an issue with the server connect, and myself, going to try a different modded server before I throw my hands up at that specific server.

I'm fixed, Nvm, got it resolved, thanks for the quick response. :) I'm so happy rn. I can't even tell you.

Geez,
I have never had this issue until I swapped my SSD, I will give them a try, and report back. I am also now getting functionality back on my LAN server as well with no more texture loss, so perhaps it is an issue with the server connect, and myself, going to try a different modded server before I throw my hands up at that specific server.

Hello MWFjUnKiE69.
This is a BattlEye kick, have you tried to contact BE support so they could possibly provide more information if it could be your connection? https://www.battleye.com/contact/

I'm done. Found that default.p3d file, archived it and deleted - same result, same error. I've had something similar with Reforger Workshop where you open some scope model and it is bugged so each time you start it it auto shuts down. Luckily I found post that says you need to go deep in the registry and change this and this, but for current problem there is no such post. I guess full reistall is the only way, and no guarantee It'll help. Why it has to be so complicated.

Also I'm not out of space on my PC, Tools were checked for integrity of files, main game aswell. I reextracted Dayz to P drive with the help of Mikeros Dayz2P. Still nothing. It starts (before start it hangs on "scanning" for 5min, and then launches and after 1-2sec disappears). I don't want to reinstall the whole game and redo P drive as I have a lot of mods there. Can you point at least any direction where to move? I tried to find "core\default\default.p3d" but as I said I don't know the location

This is the crashlog{F4262085}

It refers to some "core\default\default.p3d" but I have no Idea what and where is that

In T182735#2639409, @darkenedlotusdrake wrote:

yes, i have read your response but it didnt help and i also recently upgraded my gpu, it also didnt help

In T181668#2639501, @Helkhiana wrote:

@Geez Any news on this bug issue?

Thank you for the report Geddy.
We will investigate this with BattlEye.
Regards,
Geez

Thank you idtasov.
We will investigate with BattlEye.
Regards,
Geez

Hello DuendeSucio.
Could this be tied to this specific headset/micrphone? Does it run any additional software? Does it use any non standard features like 7.1 or similar? Have you tried some other headset/microphone?
Regards,
Geez

@Geez Any news on this bug issue?

I think we found the solution, it's been two weeks after implementing it, and so far no complaints. We added every item we have into types with lifetime of 3 hours minimum, which equals our restart duration. if lifetime is less, item can still disappear.

the problem is it suddenly started happening 140 hours in with no explanation, i need help figuring out how to fix it

yes, i have read your response but it didnt help and i also recently upgraded my gpu, it also didnt help

100% fully agree with this. Something the devs need to look into. Unfortunately you’ll probably be ignored.

One more thing I noticed. It spawned me about 100 yards from where I died. That's never happened to me before.

This helped, no more error, but it lauches and automatically shuts down after 1-2 seconds. Do you know what could cause that?

Thank you, we will investigate with BattlEye.

Hello again. Have you opened dayz through Steam after updating the tools?

Hello. Yes I do. Do I better use experimental untill the fix or the problem with stable workbench is on my side?

Hello MilesDownshur.
It looks like you are trying to run the Workbench from DayZ Tools for Stable. Do you have the DayZ Experimental Tools installed?

Here is some video

In T182899#2639071, @Akidan wrote:

The game still gives me the same issues, even after a fresh install of OS, Steam and DayZ..

Would you suggest going back to Win 10?

In T182735#2639152, @darkenedlotusdrake wrote:

is there any way to fix this issue?

Hello ScorXpion.
Can you please describe the crash in greater detail? Was this one time occurrence or has occurred multiple times(always?)? Upon which circumstances does the crash occur?

Is this being fixed?

Has this not been fixed yet?

is there any way to fix this issue?

hello?

Someone please help figure out which way to dig......

The game still gives me the same issues, even after a fresh install of OS, Steam and DayZ..

In T182498#2638929, @Geez wrote:

We do not believe the fact .mdmp was not created was caused by the exe being renamed. However it makes it much harder for the devs to analyse the issue if the executable is renamed.

It looks like when digits are imported to the workbench and converted to ANM it uses Truncate instead of Round. And that causes a loss of information.

Hello Aragon.
The crash dump points towards nvppex.dll file, indicating a problem with your GPU drivers. Please do a clean installation and check your OS for any corrupted installations/files. Also make sure your system is up to date.
Disabling HWAA in the game might resolve the issue but the root cause is somewhere on your system.
There is also a chance that if you are running Nvidia app instead of Ge-force experience that that is the cause of the problem.
Regards,
Geez

Hello Akidan.
We suggest to remove the launch parameters as most of them are obsolete and do not have any effect, especially USEALLAVAILABLECORES, -cpuCount=6 -exThreads=12, they can in fact cause problems instead.

Hello lipekso. We will investigate with BattlEye.
Regards,
Geez

We do not believe the fact .mdmp was not created was caused by the exe being renamed. However it makes it much harder for the devs to analyse the issue if the executable is renamed.

In T182498#2638413, @Geez wrote:

We would also suggest to not rename the server executable

this does not work as windows simply does not allow me to delete the folder.

Resolved for 1.26 update.

didnt work either ive even turned off antivirus to download it and still have the problem

Please open your game installation folder. In steam right click your game, then "manage" I think its called and "Browse local files".
Upload the DayZLauncher.exe.config file here so we can see what's wrong. Just Drag&Drop it into the textbox.
Then delete that file and verify your game files in Steam.

also what other info do you need, I'm newer to pc so sorry if im slower with knowing stuff

tried that and same result

Yesterday I got one kick. today its back to ever 15 minutes. run the game up the same way. think im done with it all not playable since 7th june.

Thank you, we will investigate with BattlEye.

Hello HanzThaOne.
Please try the following:

ple check your battle eye

he kill me 2 time when im die and im come back my deadody in prison at : X: 0.26 ; Y:140

We would also suggest to not rename the server executable

Hello intenso2891
Until a dev gets to analyse the issue, you could always try to make the server completely vanilla and let us know if there are any changes in behaviour. We did not register any widespread reports like this and therefore it is likely an issue with the server setup/mods etc rather than a global problem.
Regards,
Geez

Hello zachisback_real.
Please check the following

Hello Adoreee36.
Please describe the issue in greater detail. Do you receive some sort of error? Or does the game crash?

Thank you cestelo, we will investigate with BattlEye.
Regards,
Geez

Thank you Badfish.
We will investigate with BattlEye.
Regards,
Geez

Thank you, we will investigate with BattlEye.
Regards,
Geez

Thank you, we will investigate with BattlEye.
Regards,
Geez