Solved bymyselfe:

In T184094#2684962, @AGT wrote:

I tried this in order. Sadly though it did not put the panels which had been rotated back in place. Anything rotated on any axis other than the Yaw is still affected. I'll have to sort these manually because they're all rotated differently so I wouldn't be able to just alter one axis by a set amount.

This is my current internal dev version where the navmeshserver stops/crashes:

Hello JohnMcLane.
Can you please provide a minidump if you have one? Also we require the packed data of the map files so we can reproduce the issue internally

I swear I opened that dropdown last week....
With all the other issues in TB, this was annoying but at least manageable.

I also have problems packing map due to vanilla assets

Hey Geez,
would it be possible to drop us a line about whats going on and what the status is? I usually don't push like this but we are all veeeery nervous and scared.
Thank you so much
best, André

In T184094#2684201, @Geez wrote:

We had to do a number of changes on these panels as we have stumbled upon performance issues with using these in higher quantities.
As suggested earlier, for the custom server-side (inict.c, json,..) placements, it has to be corrected manually (or through some customized script that adjusts the height by an offset).
For the map makers using the Terrain Builder, the fix should be to load the project on top of 1.26 data (not 1.25!), Terrain Builder should correct the placement of the panels automatically. If that wont help, you will have to adjust the placement (correct the relative height). This can be (for example) done by right clicking on the template library item, selecting "select all objects" and moving them down manually in Buldozer. Exporting all the panels, deleting them out of the map, adjusting the export txt file to compensate for the offset through a script can be done too.

I also have ten problems.

In T184094#2684271, @Hellmaker2a wrote:

Hello there,
I have experimented same issues on Experimental Build but some thinks have solved the issue :

• Check the DataDirectory in settings is in Uppercase and correct
• Open the project
• Refresh all Rasters
• Rebuild
• Restart mask and sat tile creation
• Export WRP
• Repack map
  
  Regards !
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

Also worth noting is that, while I'm aware of the new "animPhysDetachSpeed" setting, but that only impacts vehicles based on boatscript.c, and doesn't behave as cleanly as "LinkToLocalSpaceOf". I could rewrite my boat mod to be based on boatscript.c but not my heli mod. Also if "LinkToLocalSpaceOf" isn't going to be supported (or it will misbehave) it should just be completely deprecated.

Probably the easiest way to reproduce would be using HunterZ's RoadTripNG mod, and jump on top of a vanilla car and observer the flashing and yeeting.

Hi all!

I was able to brute force a build by ignoring all errors in mikero. It's ok for my local build but it's logs are pretty grim reading

Hi everyone.

hi, I'm experiencing a problem with packing my /world folder too.

This also impact the usage of KeepInVehicleSpaceAfterLeave(true) when getting out of a vehicle seat. Basically any linkage of a player to the local space of a non-boat vehicle (based on carscript) is causing issues.

In T184094#2684201, @Geez wrote:

We had to do a number of changes on these panels as we have stumbled upon performance issues with using these in higher quantities.
As suggested earlier, for the custom server-side (inict.c, json,..) placements, it has to be corrected manually (or through some customized script that adjusts the height by an offset).
For the map makers using the Terrain Builder, the fix should be to load the project on top of 1.26 data (not 1.25!), Terrain Builder should correct the placement of the panels automatically. If that wont help, you will have to adjust the placement (correct the relative height). This can be (for example) done by right clicking on the template library item, selecting "select all objects" and moving them down manually in Buldozer. Exporting all the panels, deleting them out of the map, adjusting the export txt file to compensate for the offset through a script can be done too.

Hello there,
I have experimented same issues on Experimental Build but some thinks have solved the issue :

Ok, this is a really big Problem for me since:

We had to do a number of changes on these panels as we have stumbled upon performance issues with using these in higher quantities.
As suggested earlier, for the custom server-side (inict.c, json,..) placements, it has to be corrected manually (or through some customized script that adjusts the height by an offset).
For the map makers using the Terrain Builder, the fix should be to load the project on top of 1.26 data (not 1.25!), Terrain Builder should correct the placement of the panels automatically. If that wont help, you will have to adjust the placement (correct the relative height). This can be (for example) done by right clicking on the template library item, selecting "select all objects" and moving them down manually in Buldozer. Exporting all the panels, deleting them out of the map, adjusting the export txt file to compensate for the offset through a script can be done too.

I noticed this the other day with Elitness
Left should be 125, right 126 exp

Yeh my WIP map has an underground area which had ramps made of this item. Even the ones rotated have shifted upwards, relative to them being on the side... so this one shifted left with the red arrows pointing to where the platform object used to sit before 1.26. After 1.26 there's now a gap.

I see the floating panels is still an issue on release day... ☹️

Help me

Здравствуйте, помогите пожалуйста

I deleted these lines and the server no longer hung up, I used the standard one

all

In T185319#2682730, @realproru wrote:

networkRangeClose = 20; network bubble distance for spawn of close objects with items in them (f.i. backpacks), set in meters, default value if not set is 20
networkRangeNear = 150; network bubble distance for spawn (despawn +10%) of near inventory items objects, set in meters, default value if not set is 150
networkRangeFar = 1000; network bubble distance for spawn (despawn +10%) of far objects (other than inventory items), set in meters, default value if not set is 1000
networkRangeDistantEffect = 4000; network bubble distance for spawn of effects (currently only sound effects), set in meters, default value if not set is 4000
networkObjectBatchLogSlow = 5; Maximum time a bubble can take to iterate in seconds before it is logged to the console
networkObjectBatchEnforceBandwidthLimits = 1; Enables a limiter for object creation based on bandwidth statistics
networkObjectBatchUseEstimatedBandwidth = 0; Switch between the method behind finding the bandwidth usage of a connection. If set to 0, it will use the total of the actual data sent since the last server frame, and if set to 1, it will use a crude estimation
networkObjectBatchUseDynamicMaximumBandwidth = 1; Determines if the bandwidth limit should be a factor of the maximum bandwidth that can be sent or a hard limit. The maximum bandwidth that can be sent fluctuates depending on demand in the system.
networkObjectBatchBandwidthLimit = 0.8; The actual limit, could be a [0,1] value or a [1,inf] value depending on networkObjectBatchUseDynamicMaximumBandwidth. See above
networkObjectBatchCompute = 1000; Number of objects in the create/destroy lists that are checked in a single server frame
networkObjectBatchSendCreate = 10; Maximum number of objects that can be sent for creation
networkObjectBatchSendDelete = 10; Maximum number of objects that can be sent for deletion

are you using this in your config?

networkRangeClose = 20; network bubble distance for spawn of close objects with items in them (f.i. backpacks), set in meters, default value if not set is 20
networkRangeNear = 150; network bubble distance for spawn (despawn +10%) of near inventory items objects, set in meters, default value if not set is 150
networkRangeFar = 1000; network bubble distance for spawn (despawn +10%) of far objects (other than inventory items), set in meters, default value if not set is 1000
networkRangeDistantEffect = 4000; network bubble distance for spawn of effects (currently only sound effects), set in meters, default value if not set is 4000
networkObjectBatchLogSlow = 5; Maximum time a bubble can take to iterate in seconds before it is logged to the console
networkObjectBatchEnforceBandwidthLimits = 1; Enables a limiter for object creation based on bandwidth statistics
networkObjectBatchUseEstimatedBandwidth = 0; Switch between the method behind finding the bandwidth usage of a connection. If set to 0, it will use the total of the actual data sent since the last server frame, and if set to 1, it will use a crude estimation
networkObjectBatchUseDynamicMaximumBandwidth = 1; Determines if the bandwidth limit should be a factor of the maximum bandwidth that can be sent or a hard limit. The maximum bandwidth that can be sent fluctuates depending on demand in the system.
networkObjectBatchBandwidthLimit = 0.8; The actual limit, could be a [0,1] value or a [1,inf] value depending on networkObjectBatchUseDynamicMaximumBandwidth. See above
networkObjectBatchCompute = 1000; Number of objects in the create/destroy lists that are checked in a single server frame
networkObjectBatchSendCreate = 10; Maximum number of objects that can be sent for creation
networkObjectBatchSendDelete = 10; Maximum number of objects that can be sent for deletion

win10 server.

I realized this afternoon maybe it's because I was still using 1.25 assets in exp TB..
Attempted to extract and use addon builder since mikros is throwing errors too.. (From what I gather in discord the tool isn't compatible yet....)

I've attempted exporting my world with the latest exp Terrain builder tonight with the same results.

https://steamcommunity.com/sharedfiles/filedetails/?id=1559212036 geometry dash
Does the mod you provided work on Window 10? I will try it

помогите, что это за ошибка, как её исправить

anybody?

Thank you for quick reply, as I understand that control of turning using new method will be still more useful for my usecase.

Here is some small documentation for those two functions:

Simply I just want control animal by speed and turn, his movement in world should be based on entityposition movement/rotation as is visible in animeditor video above, not by overriding heading or turnspeed.

hello, do you have any update for this by any chance ? I still don't success to find what is the problem :/
Regards,
LaGTeK

Good afternoon, it's been a long time, is there any information?
Any kind, at least indirect, will do for me, so that I understand what the gap is and exclude it immediately

Thank you maxom.
We will investigate with BattlEye.
Regards,
Geez

Hi hunter I added your dayz hose mod to my server and the horses spawn on the map but thay dont do anything when you ar egiven the option to give them a apple also theres no atachment option on horse for saddle or the mouth part is there a way to help me fix it cose Id love to have them in server ?

This is my map built from the current stable release of terrain builder

Hello Nate_LapT.
You would have to change all positions of the panels in JSON or in init.c script. In case you or the modder has his own map he can rebuild the whole map in terrain builder tool.
Regards,
Geez